NEC MA4000 Installation Phase, Kind, 41459 , and DMS Nortel, A211, MAC Address, Name Description

5-14 Hardware Information

Installation Phase	The phase the device intends to
	install.
Kind	The PRI trunk type selected from
	the pull-down menu (NI-2, AT&T
	- 41459, and DMS - Nortel
	A211).
MAC Address	The Media Access Control address
	for the equipment. The address is
	located on the bottom of the
	equipment.
Name (Description)	Circuit card name.
Network Mask	A string of 0's and 1's that mask
	or screen out the network part of
	an IP address (IP) so that only
	the host computer part of the
	address remains.
Number of Attendants Consoles	The number of attendant consoles
	the system contains.
Operate Unit in SIP Mode	Initiates an interactive user
	session that involves multimedia
	elements such as video, voice,
	chat, etc.
REGMAX	The registration assignment
	capacity (1-6144). This maximum
	should not exceed the line
	capacity of the system. Default is
	256.
Repeat Pattern	Indicates the sequence of the
	announcements the caller should
	hear.
Route Name	Note. This field can only be
	modified if the Service Type is
	ANNC.
Route Restrictions (RSC)	The restriction classes in the
	system.
Send Answer Signal	Indicates whether Answer
	Supervision should be sent when
	an incoming Trunk connects to an
	Announcement.

Service Feature Restrictions (SFC)The service feature classes built into the system.

Service Type	How the channel is to be used.
Signal Ch. Route Name	The Media Gateway circuit card’s
	signal channel route name.
Station Number	The number of an available
	station number conforming to the
	numbering plan.

MA4000 Installation Manager User Guide - Revision 7