Graphical User Interface |
Clipboard has been enhanced to be able to perform batch downloads. You have the ability to:
•Download data from the switch based on categories (for example, Station Data, Trunk Data, Restricted Data, etc.)
•Add commands the data needs to be download to a list that would be run as a batch process.
•Save selected commands in user template files for future access.
This enhancement lessens the work needed when downloading data for the same set of commands.
To launch Clipboard, do the following:
Step From Microsoft Desktop, select Start > Programs > Installation Manager R25 > Clipboard.
OR
Step From the Installation Manager Menu Bar, click Tools > Clipboard.
Figure 3-46 MAT Clipboard
Network Manager...
The Network Manager is used to manage existing networks while using Installation Manager to install and manage new networks.
The Network Manager application is intended to enhance the capabilities already present within Installation Manager, but it does not require Installation Manager in order to perform its task. Network Manager can function in a
Use of this software is normally conducted as follows:
Step 1 Install NCN PBX using Installation Manager (optional).
Step 2 Install LCN PBX using Installation Manager (optional).
Step 3 Create FCCS Network using Network Manager (optional).
Step 4 Insert LCN node into existing FCCS Network using Network Manager.
MA4000 Installation Manager User Guide - Revision 7