NEC manual Configuration Tab, UC Suite MA4000 Manager, Clipboard, Location Diversity

13-2 Productivity Features

The Productivity Features menu provides access to applications you use in conjunction with Installation Manager. These applications launch in a separate window and perform specific functions you need to configure your system properly. Some of these applications are also available from the Tools menu.

The Tools tab contains four sub-tabs:

•Configuration

•Management

•Diagnostic

•Maintenance

Some options within a tab may not display, or may not be available, based on your system type and certain options you selected during your system's installation.

Configuration Tab

The Configuration tab (Figure 13-2) consists of the following

applications:
• UC Suite - MA4000 Manager	Allows the user to load existing
	Installation Manager data to the
	MA4000.
• Clipboard	Provides the user with integrated
	access to the MAT Clipboard
	application (see Clipboard... for
	additional information on this
	option).
• Location Diversity	Provides fault tolerance for IP
	telephones in an FCCS (Fusion)
	network by providing stations the
	ability to register with up to two
	back-up IP-PBX nodes in the
	network providing fail-over services
	to the physical/virtual station in the
	event of a communications failure
	between the station and its primary
	IP-PBX.
	Note: While the IP terminals are
	under the control of a backup node,
	the station can continue to function
	until the primary node becomes
	available. Not all station
	functionality is available while it is
	operating on one of the backup
	nodes (for example, appearance,
	dependencies, etc.)

MA4000 Installation Manager User Guide - Revision 7