Hardware Information |
Name (Description) field
Enter a server description, or use the default shown.
Signaling Server ID field (This name must be unique on the NEAX IPX UMG)
Enter the Signaling Server’s ID, or use the default value of 1.
Speech Channels field
Enter the appropriate number of channels, or use the default value of 0.
LMG field (UMG System Only)
Enter the Local Module Group total (0 - 3).
New IP Address field
Enter the Signaling server’s new IP address.
Network Mask field
Enter the Subnet Mask for the Signaling Server's IP Address.
Gateway field
Provide the Gateway’s address for routing.
MPH ID field (This name must be unique on the NEAX IPX UMG)
Enter the Multi Protocol - MPH ID, or use the default value of 1.
Time Zone field
Select the applicable time zone.
DNS field
Enter the DNS Data (Signaling Server) address or name. If using the address format, enter the Signaling Server's IP Address (same as the 'New' IP Address field).
Domain Name field (This name must be unique on the NEAX IPX UMG)
Supply the network system’s domain name for the Signaling server, or use the default UNIVERGE_SV_7000.COM.
Installation Phase field
Specify the phase in which the signaling server data will be uploaded to the server. (Phased installations only).
MA4000 Installation Manager User Guide - Revision 7