NEC M5, M7 manual Removing the LCD panel screws, =M2.5x7 black =M2x4 black

Page 14

4. Unscrew all screws encircled in Fig. 19

Fig. 19 Removing the LCD panel screws

5. Remove the Side Rubber Covers at the side of the LCD. Release all four screws.

Fig. 20 Remove Side Rubber Covers

6.Carefully lift up LCD panel together with the Inverter board and disconnect the power cable from the Inverter board. Disconnect the inverter connector remaining on the left side of the inverter board. Put a side the inverter board.

A=M2.5x7 black

B=M2x4 black

M2x4 black

Packard Bell EasyNote M5/M7 Disassembly Manual

14

Image 14

Contents Packard Bell EasyNote M5 / M7 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician NotesAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage =M2.5x7 black =M2.5x5 black Removing the BatteryRemoving the Hard Disk Drive Disconnecting the hard disk drive M3x4 silverRemoving the Optical Disk Drive M2.5x5 blackRemoving the Keyboard M2x2.5 silverUnlock the Keyboard Removing the Memory Module Removing the screw retaining the memory module slot coverDisconnecting LCD Connector Removing the LCD ModuleRemoving the 15 LCD Panel M3x6 silverScrews on the LCD Module =M2x4 black =M2.5x7 blackRemoving the LCD panel screws =M2.5x7 black =M2x4 blackRemoving the 14 LCD Panel M2x3.5 blackUnscrew all screws as shown in Fig Removing the side rubber covers =M2x4.5 Silver =M2x4 black =M2.5x7 blackRemoving the CPU M2x3.5 black M2.5x5 blackRemoving the heat sink M3x21Removing the Bottom Cover Removing the Quick Key BoardRemoving screws on bottom of the system =M2.5x7 black =M2.5x5 black =M2.5x3.5 Black =Hex2.5x10Removing the Bottom Cover Disconnecting main board and LED board Removing the Main BoardRemoving the MDC Modem Module M2.5x7 black M2x4.5 blackRemoving the Wlan Module Removing the Wlan ModuleM2x3 black M2x3.5 black Removing the Speaker AssemblyRemoving the Touch Pad Dipswitch Settings ScrewsEasyNote M5/M7 Disassembly Manual