NEC M5, M7 manual Unscrew all screws as shown in Fig

Page 16

2. Unscrew all screws as shown in Fig. 23

Fig. 23 Screws on the LCD Module

3. Release the LCD Bezel from the side carefully and put it aside as shown in Fig. 24

Fig. 24 Removing the LCD Bezel

Note: For the 14” LCD Models, you need to open up the LCD Bezel from either left or right side of LCD module.

B=M2x4 black

A=M2.5x7 black

Packard Bell EasyNote M5/M7 Disassembly Manual

16

Image 16

Contents Packard Bell EasyNote M5 / M7 Disassembly Manual Table of contents Disassembly Instructions Reassembly InstructionsOverview Technician NotesHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Removing the Hard Disk Drive Removing the Battery=M2.5x7 black =M2.5x5 black Disconnecting the hard disk drive M3x4 silverRemoving the Optical Disk Drive M2.5x5 blackRemoving the Keyboard M2x2.5 silverUnlock the Keyboard Removing the Memory Module Removing the screw retaining the memory module slot coverDisconnecting LCD Connector Removing the LCD ModuleRemoving the 15 LCD Panel M3x6 silverScrews on the LCD Module =M2x4 black =M2.5x7 blackRemoving the LCD panel screws =M2.5x7 black =M2x4 blackRemoving the 14 LCD Panel M2x3.5 blackUnscrew all screws as shown in Fig Removing the side rubber covers =M2x4.5 Silver =M2x4 black =M2.5x7 blackRemoving the CPU M2x3.5 black M2.5x5 blackRemoving the heat sink M3x21Removing the Bottom Cover Removing the Quick Key BoardRemoving screws on bottom of the system =M2.5x7 black =M2.5x5 black =M2.5x3.5 Black =Hex2.5x10Removing the Bottom Cover Disconnecting main board and LED board Removing the Main BoardRemoving the MDC Modem Module M2.5x7 black M2x4.5 blackRemoving the Wlan Module Removing the Wlan ModuleRemoving the Touch Pad Removing the Speaker AssemblyM2x3 black M2x3.5 black Dipswitch Settings ScrewsEasyNote M5/M7 Disassembly Manual