NEC M5, M7 manual Removing the CPU, M2x3.5 black M2.5x5 black

Page 18

7.Remove the screws on both sides of the LCD panel in order to release the LCD hinges as shown in Fig. 27

Fig. 27 Removing the LCD Panel hinges

8. Release the speakers at both sides of the LCD back cover as shown in Fig. 28

Fig. 28 Removing the Speakers

Removing the CPU

To remove the CPU, first remove the battery (see Removing the Battery), then perform the following steps:

1. Remove the screw retaining the CPU Cover as shown in Fig. 29

Fig. 29 CPU Cover

Packard Bell EasyNote M5/M7 Disassembly Manual

M2x3.5 black

M2x3.5 black

M2.5x5 black

18

Image 18

Contents Packard Bell EasyNote M5 / M7 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the Battery Removing the Hard Disk Drive=M2.5x7 black =M2.5x5 black Disconnecting the hard disk drive M3x4 silverRemoving the Optical Disk Drive M2.5x5 blackRemoving the Keyboard M2x2.5 silverUnlock the Keyboard Removing the Memory Module Removing the screw retaining the memory module slot coverDisconnecting LCD Connector Removing the LCD ModuleRemoving the 15 LCD Panel M3x6 silverScrews on the LCD Module =M2x4 black =M2.5x7 blackRemoving the LCD panel screws =M2.5x7 black =M2x4 blackRemoving the 14 LCD Panel M2x3.5 blackUnscrew all screws as shown in Fig Removing the side rubber covers =M2x4.5 Silver =M2x4 black =M2.5x7 blackRemoving the CPU M2x3.5 black M2.5x5 blackRemoving the heat sink M3x21Removing the Bottom Cover Removing the Quick Key BoardRemoving screws on bottom of the system =M2.5x7 black =M2.5x5 black =M2.5x3.5 Black =Hex2.5x10Removing the Bottom Cover Disconnecting main board and LED board Removing the Main BoardRemoving the MDC Modem Module M2.5x7 black M2x4.5 blackRemoving the Wlan Module Removing the Wlan ModuleRemoving the Speaker Assembly Removing the Touch PadM2x3 black M2x3.5 black Dipswitch Settings ScrewsEasyNote M5/M7 Disassembly Manual