Lexmark S310 manual

Page 10

About your printer

10

20Unpack the ink cartridges, and then remove the protective caps from the cartridges.

1

2

3

21Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.

3

1

2

Notes:

Insert the color cartridges first, and then the black cartridge.

Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.

22Close the printer.

23Press OK to print an alignment page.

Notes:

The alignment page prints.

Do not remove the page until printing is finished. The alignment page may take a while to print and will move in and out during the process.

Streaks on the alignment page are normal and not an indication of a problem.

The alignment page that prints may differ from the one shown.

Recycle the alignment page.

Image 10
Contents S310 Series Quick Reference Guide OctoberImportant safety information Contents Finding information about the printer Minimizing your printers environmental impactSetting up the printer Printer featuresPrinter models Page Page Yes Set the time, and then press OK Page Understanding the parts of the printer UseUsing the printer control panel Using a flash drive with the printer Using flash drivesSupported file types Ordering ink cartridges Ordering and replacing ink cartridgesReplacing ink cartridges Maintaining ink cartridges Setup OK Maintenance OK Align Printer OKAligning the printhead Cleaning the printhead nozzles Using the Windows printer software Using the printer softwareInstalling the printer software Software installed during printer installationLaunching the Print dialog Using the Macintosh printer softwareLaunching an application Accessing Web links Printing a document Click Properties, Preferences, Options, or SetupPrinting Printing on both sides of the paper duplexing automaticallyPrinting photos from a flash drive Canceling print jobsWhat is LexPrint? Printing from a mobile deviceMaking copies CopyingTips for copying Making a two‑sided duplex copy automaticallyCanceling copy jobs Tips for scanning Scanning directly to e‑mail using the printer softwareScanning Scanning to a local computerCanceling scan jobs Sending e-mail Canceling an e‑mailSetting up the e-mail function Tips for e‑mailingInstalling the printer on a wireless network Wireless networkingWhat is Wi‑Fi Protected Setup? Configuring Wi‑Fi Protected Setup manually USE the Push Button Configuration PBC MethodSetup troubleshooting TroubleshootingIf Troubleshooting does not solve your problem Before you troubleshootPrint job does not print or is missing pages Printer is printing blank pagesCannot print through USB Cannot delete documents from the print queuePrinter is busy or does not respond Printing a network setup Wireless network troubleshootingWireless troubleshooting checklist Cannot print over wireless networkMove the Computer AND/OR Printer Closer to the Access Point Make Sure Demo Mode is Turned OFFMove Your Access Point Away from Other Electronic Devices Check the Wireless Signal QualityMac OS X version 10.5 or later Click Advanced or ConfigureMac OS X version 10.4 or earlier Make Sure Bidirectional Communication is Enabled Make Sure the Wireless Port is SelectedLocating the printer IP address Trademarks Edition noticeLexmark International, Inc All rights reserved Index
Related manuals
Manual 40 pages 9.02 Kb