Lexmark S310 manual Maintaining ink cartridges, Aligning the printhead

Page 15

Ordering and replacing ink cartridges

15

3Press the release tab, and then remove the used ink cartridge or cartridges.

12

Installing ink cartridges

1Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge. If your ink cartridge comes with a twist cap, then remove the cap.

1

2

3

2Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.

3

1

2

Notes:

Insert the color cartridges first, and then the black cartridge.

Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.

3Close the printer.

Maintaining ink cartridges

In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle every week if it is plugged into a properly grounded, working electrical outlet. It will briefly come out of Sleep mode or will temporarily turn on if it is turned off.

Aligning the printhead

If the characters or lines on your printed image appear jagged or wavy, then you may need to align the printhead.

1Load plain paper.

2From the printer control panel, navigate to:

> Setup > OK >Maintenance > OK > Align Printer > OK

An alignment page prints.

Note: Do not remove the alignment page until printing is finished.

Image 15
Contents October S310 Series Quick Reference GuideImportant safety information Contents Minimizing your printers environmental impact Finding information about the printerPrinter features Setting up the printerPrinter models Page Page Yes Set the time, and then press OK Page Use Understanding the parts of the printerUsing the printer control panel Using flash drives Using a flash drive with the printerSupported file types Ordering and replacing ink cartridges Ordering ink cartridgesReplacing ink cartridges Setup OK Maintenance OK Align Printer OK Maintaining ink cartridgesAligning the printhead Cleaning the printhead nozzles Software installed during printer installation Using the printer softwareInstalling the printer software Using the Windows printer softwareUsing the Macintosh printer software Launching the Print dialogLaunching an application Accessing Web links Printing on both sides of the paper duplexing automatically Click Properties, Preferences, Options, or SetupPrinting Printing a documentPrinting from a mobile device Canceling print jobsWhat is LexPrint? Printing photos from a flash driveMaking a two‑sided duplex copy automatically CopyingTips for copying Making copiesCanceling copy jobs Scanning to a local computer Scanning directly to e‑mail using the printer softwareScanning Tips for scanningCanceling scan jobs Tips for e‑mailing Canceling an e‑mailSetting up the e-mail function Sending e-mailWireless networking Installing the printer on a wireless networkWhat is Wi‑Fi Protected Setup? USE the Push Button Configuration PBC Method Configuring Wi‑Fi Protected Setup manuallyBefore you troubleshoot TroubleshootingIf Troubleshooting does not solve your problem Setup troubleshootingPrinter is printing blank pages Print job does not print or is missing pagesCannot delete documents from the print queue Cannot print through USBPrinter is busy or does not respond Cannot print over wireless network Wireless network troubleshootingWireless troubleshooting checklist Printing a network setupCheck the Wireless Signal Quality Make Sure Demo Mode is Turned OFFMove Your Access Point Away from Other Electronic Devices Move the Computer AND/OR Printer Closer to the Access PointClick Advanced or Configure Mac OS X version 10.5 or laterMac OS X version 10.4 or earlier Make Sure the Wireless Port is Selected Make Sure Bidirectional Communication is EnabledLocating the printer IP address Edition notice TrademarksLexmark International, Inc All rights reserved Index
Related manuals
Manual 40 pages 9.02 Kb