Lexmark 120 manual Using the operator panels Network interface errors, Host interface disabled

Using the operator panels

Network interface errors

Light sequence:

•Continue—On

•Error—On

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

•Continue—On

•Paper Jam—On

•Error—On

Message:

Printer cannot establish communication with the network.

Primary light	Secondary light
sequence	sequence

Solution:

•Press to clear message and continue printing. (may not print correctly).

•Press and hold to reset printer (may need to send the job again).

Host interface disabled

Light sequence:

•Continue—On

•Error—On

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

•Continue—On

•Load / Remove Paper—Blinking

•Paper Jam—Blinking

•Error—On

Message:

Printer USB or network port has been disabled.

Solution:

Primary light	Secondary light
sequence	sequence

•Press to clear message. The printer discards all jobs previously sent.

•Enable the network port by selecting a value other than Disabled for the Network Buffer item in the Local Printer Setup Utility (see Software and Documentation CD).

Overview of the Lexmark E120n operator panel

38