Lexmark 120 manual Uneven print density, Ghost Images, Specifically located ghost images

Page 80

Troubleshooting

Symptom

Cause

Solution

 

 

 

Uneven print density

The toner cartridge is defective.

First, remove and reset the toner

 

 

cartridge. If problem persists, replace

 

 

the toner cartridge.

ABCDE

 

 

ABCDE

 

 

ABCDE

 

 

Ghost Images

 

 

The Form Type setting in the printer

Make sure the Form Type setting is

 

 

 

driver is incorrectly set.

correct for the paper or specialty

 

 

 

 

media used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifically located ghost images

The long-life photoconductor kit is exhausted.

Replace the long-life photoconductor kit.

Grouped streaks along the left side of the printed page

The long-life photoconductor kit is exhausted.

Replace the long-life photoconductor kit.

*To replace the fuser, call a service technician.

This setting can be changed using the Local Printer Setup Utility (Windows), or through Printer Settings (Macintosh). See Software and Documentation CD for additional information.

Print quality problems

80

Image 80
Contents E120, E120n Edition July Contents Contents Overview Overview Continue Using the operator panels Lexmark E120 operator panel lights Using the operator panelsOverview of the Lexmark E120 operator panel Understanding the Lexmark E120 operator panel lights Light sequenceService error secondary Ready / Data light blinks ten times Primary Codes Ready / Power Saver Operator panel codes for the Lexmark E120Using the operator panels Busy WaitingInvalid engine code Using the operator panels Cancel job / Reset printerFlushing buffer Programming engine code or system code Using the operator panels Not readyPrinting font list or menu settings Using the operator panels Restoring factory defaults Cartridge region mismatchOpen door Missing cartridge / Defective cartridge detectedUsing the operator panels Complex ENA connection lostUsing the operator panels Insufficient collation area Load mediaUsing the operator panels Print side two of a duplex job Memory fullUsing the operator panels Host interface disabled Jam in the printer paper pathUsing the operator panels Jam in Tray 1 / priority feeder Using the operator panels Short paper Toner lowService error Overview of the Lexmark E120n operator panel Press and release ContinueUnderstanding the Lexmark E120n operator panel lights Network interface errors Host interface disabledMissing cartridge / Defective cartridge DetectedUnsupported toner cartridge Service error Operator panel codes for the Lexmark E120nResolution reduced Using the operator panels Waiting Current job is canceledLoad / Remove Paper-On Using the operator panels Invalid engine codeError-On Toner Low/Replace PC Kit-Blinking Error-Blinking Change cartridge Missing cartridge / Defective cartridge detected Ready / Data-OnUsing the operator panels ENA connection lost Paper Jam-BlinkingToner Low/Replace PC Kit-On Continue-Blinking Load / Remove Paper-On Using the operator panels Network interface errors Using the operator panels Jam at the input sensor Jam between the input and exit sensorsUsing the operator panels Jam at printer exit sensor Using the operator panels Resource save off Long-life photoconductor kit life warning Using the operator panels Toner lowSee Using the printer resident Web page on Using the printer resident Web Unsupported toner cartridgeMenu settings and network setup Printing the menu settings and network setupRestoring factory defaults Print media tasks and tips Types of print media Choosing appropriate print mediaPaper Print media tasks and tipsPreprinted forms and letterhead TransparenciesEnvelopes LabelsCard stock Storing print mediaLoading print media into Tray Loading print media into Tray Print media tasks and tips Loading print media into the priority feeder Preventing jams Clearing jams Print media tasks and tips Print media tasks and tips Print media tasks and tips Print media tasks and tips Printing tasks Printing from the priority feeder From a Windows computerPrinting tasks Click File Æ PrintSelect Manual Paper or Manual Envelope as appropriate Click File Æ Page SetupFrom a Macintosh computer Printing on both sides of the paper manual duplex Printing multiple page images on one page N-up printing Printing on letterhead From printer operator panel Canceling a print jobClick Start Æ Settings Æ Printers Supplies information Ordering supplies Supply items neededSupplies information Network setup page on Assessing supply needsSupplies information Storing supplies Conserving suppliesChanging the toner cartridge Supplies information Supplies information Changing the long-life photoconductor kit Supplies information Supplies information Refilled toner cartridge notice Lexmark Return ProgramRecycling Lexmark products Troubleshooting General problems Print quality problemsGeneral problems TroubleshootingTroubleshooting Print quality problems White linesStreaked horizontal lines Streaked vertical linesLight print Dark printPoor transparency print quality Toner specksUneven print density Ghost ImagesSpecifically located ghost images Grouped streaks along the left side of the printedStreaks at the bottom of the printed Uneven printingIncorrect margins Skewed printLicensing Notice Conventions Electronic emission noticesEnergy Star Noise emission levelsLaser notice Lexmark International, Inc. Lexington, KYAdditional rights Index Index USB