Lexmark 4076-0XX Fru Or Procedure, Action, Perform the “Encoder Sensor Test” on, Check” on page

4076-0XX

	FRU OR PROCEDURE	ACTION
5	Print Head Cable	Be sure connector J1 is fully seated.
		Check the cable for damage.
6	Encoder Strip	Perform the “Encoder Sensor Test” on
	Print Head Cable,	page 27. If you cannot enter the test,
	System Board	replace the system board.
7	Maintenance Station	A problem with the maintenance sta-
		tion can cause carrier movement
		problems at the right margin. Go to
		the “Maintenance Station Service
		Check” on page 12.

Diagnostic Information 23