Lexmark MX710DHE, 24T7310, 237, 037 manual Supported paper sizes, types, and weights, Storing paper

Paper and specialty media guide 90

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

•For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.

•Store paper in cartons, on a pallet or shelf, rather than on the floor.

•Store individual packages on a flat surface.

•Do not store anything on top of individual paper packages.

•Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the types of paper they support.

Note: For an unlisted paper size, select the closest larger listed size.

Paper sizes supported by the printer

Note: When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.

Paper size1	Dimensions	Standard or	2100‑sheet tray	Multipurpose	Duplex	ADF	Scanner
		optional 250‑		feeder			glass
		or 550‑sheet
		tray
A4	210 x 297 mm
	(8.3 x 11.7 in.)
A5	148 x 210 mm		2
	(5.8 x 8.3 in.)
A6	105 x 148 mm		X
	(4.1 x 5.8 in.)
JIS B5	182 x 257 mm		X
	(7.2 x 10.1 in.)
Letter	216 x 279 mm
	(8.5 x 11 in.)

1If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2Paper is supported in long‑edge orientation.

3Universal is supported in ADF only if the width is from 76 mm (3 in.) to 216 mm (8.5 in.), and the length is from 127 mm (5 in.) to 356 mm (14 in.).