Fluke pmn instruction manual ,

Page 4

The Series 500A/102A/152A/202A are High Voltage Switching Power Supplies designed specifically for charging capacitors in laser systems and other pulsed power applications. The 500A provides 500 J/s, the 102A is 1000 J/s, 152A is 1,500 J/s, and the 202A provides 2000 J/s of average power and can be paralleled indefinitely for higher total system power. Lambda EMI also offers the 402 Series, 802 Series, and 303 Series rated at 4,000, 8,000 and 30,000 J/s respectively.

The 500A/102A/152/202A power supplies incorporate a new high-frequency IGBT parallel resonant inverter topology for efficient generation of the output power. A high-performance control module precisely regulates the output voltage, automatically compensating for line, load, temperature, rep rate variations. Normal external fault conditions such as line dropout, open or short circuit load, HV arc and over-temperature will not damage the unit. The latest development in the parallel resonant inverter topology and control circuitry also drastically improves pulse-to-pulse repeatability by reducing the ripple or "bucket effect" even at very high pulse repetition frequencies. The output voltages of the 500A/102A/152A/202A supplies are fully adjustable over each range.

INPUT/POWER

							Step-up
PFC / Fuses				High Freq.			Step-up
PFC / Fuses				Resonant			Transformer
Inrush Limit

				Inverter			HV Rect.
				Inverter			HV Rect.
							HV Filter
							HV Filter

Control

&

Aux. Power

Figure 1.1 500A/102A/152A/202A Block Diagram

HV OUTPUT

83-493-001	Revision G
1 - 1	Introduction

Image 4

Contents Specifications InstallationIntroduction ESDMaintenance and Calibration Applications # ! # Specifications Specifications Specifications Specifications $ Input AC Power Connection NON-PFC Version % Grounding of Input Line Output Ground Connection Eample Of Interface Connection Revision G Operations Fault & Output Current Measurement ! Long Charge Time Operation Revision G Applications

pmn specifications

Fluke PMN, or Fluke Precision Measurement Network, is an advanced solution designed to enhance the reliability and accuracy of metrology in various applications. This system is aimed at professionals in industries such as manufacturing, aerospace, telecommunications, and utilities, where precision measurement is critical.

One of the main features of Fluke PMN is its integrated measurement capabilities. The system combines multiple measurement functions, including voltage, current, resistance, frequency, and temperature, enabling users to perform comprehensive assessments without the need for multiple devices. This integration simplifies workflows and reduces the time spent on measurements.

Fluke PMN utilizes cutting-edge measurement technologies to ensure high accuracy and repeatability. One notable technology is its advanced digital signal processing, which minimizes noise and enhances the clarity of measurements. This results in significantly improved measurement precision, especially in complex environments where interference is prevalent.

Another key characteristic of Fluke PMN is its scalability. The system can be expanded with additional modules to adapt to the specific needs of a business. This modularity makes it a versatile choice for organizations looking to grow their measurement capabilities over time without the need for complete system overhauls.

Fluke PMN also supports remote monitoring and management through cloud technology. Users can access real-time data, generate reports, and perform analysis from virtually anywhere, making it easier to manage multiple measurement sites and maintain consistent quality standards across operations.

The user-friendly interface is another significant aspect of Fluke PMN. The intuitive design allows users to easily navigate through its various functions, ensuring that even personnel with minimal training can operate the system efficiently. This aspect greatly reduces the learning curve and improves overall productivity.

In addition to these features, Fluke PMN is built to withstand the rigors of industrial environments. Its durable construction ensures longevity and reliability, minimizing downtime due to equipment failure. This resilience is crucial for industries that depend on continuous operation and stringent adherence to quality control standards.

Overall, Fluke PMN represents a powerful solution for precision measurement. With its integrated capabilities, advanced technologies, scalability, remote monitoring, and robust design, it equips professionals with the tools they need to enhance accuracy, streamline operations, and uphold the highest standards of quality in their respective fields.