Fluke 875 manual Table of Contents

Table of Contents

Section 1:	Introduction	1-1
1.1	General Description	1-1
1.2	Specifications	1-1
1.3	Equipment Overview	1-3
1.4	Receiving Inspection	1-8
1.5	Storage	1-9
1.6	Procedures, Warnings, and Cautions	1-9

Section 2:	Installation	2-1
2.1	Installation	2-1
2.2	Cable and Wiring Installation	2-3
Section 3:	Operation	3-1
3.1	Operation	3-1
Section 4:	Operation	4-1
4.1	Functional Description	4-1
4.2	Readout Module 876A-1	4-1
Section 5: Maintenance, Calibration, and Troubleshooting		5-1
5.1	Maintenance	5-1
5.2	Calibration	5-1
5.3	Troubleshooting	5-3
5.4	Power Supply Measurements	5-4
5.5	Signal Input Circuit	5-4
5.6	Metering Circuit	5-5
5.7	The Alarm Circuits	5-5
5.8	High Alarm Circuit	5-6
5.9	Muting Stages of the Alarm Circuits	5-6
5.10	ESC Board	5-7
5.11	Overall Fail Circuitry Associated with the ECS Test	5-9
5.12	Starting with Pins M and P on the Power Supply Schematic	5-9
5.13	Starting with Terminal H on Relay Driver Board	5-9
5.14	Provision of Inputs to Terminals M and P on the Power Supply Board	5-9
5.15	Outputs of U206 Pulse Generator on the ECS Board	5-10
5.16	Operation of the Latch Circuit	5-10

i