Oki 3100e manual Installing as LPR printer, Language

Installing as LPR printer

1.Open the [Control Panel] and double-click on [Network and Dial-up connections].

2.Double-click on [Local Area Connection] and click on [Properties].

3.Select [Internet Protocol (TCP/IP)] on [Local Area Connection Properties] screen and click on [Properties].

4.Enter [IP address], [Subnet mask], [Default gateway] and [DNS server address], then click on [OK].

Note:	For the IP address setup when DHCP Server
	is used, please refer to “IP address setting in
	DHCP server environment” on page 29.

5.Close [Local Area Connection] screen.

6.Double-click on [Printers], then double-click on [Add Printer].

7.[Add Printer Wizard] is displayed. For printer management, select [Local printer] and click on [Next>].

8.On the port selection screen, select [Create a new port:] and [Standard TCP/IP Port], then click on [Next>].

English

9.On [Add Standard TCP/IP Printer Port Wizard] screen, select [Okidata Network Printer] in [Standard] printer as [Device Type], then click on [Next>].

10.On [Add Printer Wizard] screen, click on [Have Disk...].

11.Insert the printer driver CD-ROM into the CD drive and click on [OK].

12.Follow the on-screen instructions and install the printer driver.

Note:	By default, Windows will install the English
	printer driver. To install a localised printer
	d r i v e r i n y o u r l a n g u a g e , b r o w s e t o
	D:\DRIVERS\WIN2000\Language on the
	CD-ROM and run setup.exe from that
	directory (where D:\ is the drive letter of
	your CD-ROM drive; Language is your
	language).

13.When the printer driver is installed, right-click on the installed printer and select [Properties].

14.Click on [Print Test Page] button and the setup is complete when the test pages are printed.

Chapter 3 - Network Setup 11