Oki 3100e manual Setting NetWare environment, Default

Page 54

Type “y” to ENABLE DHCP Will you use RARP? (y/n): n [Enter]

Type “y” to ENABLE RARP

IP Addr (OLD) 192.36.253.96 (NEW) 192.36.253.100 [Enter]

SUBNET

MASK(OLD) 255.255.255.0 (NEW) [Enter]

DEFAULT

GATEWAY (OLD) 192.36.253.254 (NEW) [Enter]

Are you re-setting (y/n): n [Enter] Type “y” to reset

OkiPage> logout (or exit or quit) [Enter]

If you wish to set other protocols now, enter an appropriate command without logging out.

You can change TCP/IP address with the set address command, too, in addition to the set protocol command.

OkiPage> set address [Enter]

IP Addr (OLD) 192.36.253.96 (NEW) 192.36.253.100 [Enter]

SUBNET

MASK(OLD) 255.255.255.0 (NEW) [Enter]

DEFAULT

GATEWAY(OLD) 192.36.253.254 (NEW) [Enter]

The set address command can specify the item to change.

OkiPage> set address ip (or “mask”,”gateway”) [Enter]

Setting NetWare environment

In Telnet, you set the NetWare environment of this network card. For setting the NetWare server, use PCONSOLE, NetWare Adm in istrator Utility, OkiView, etc.

Display/set the NetWare environment.

Display

Command to use:

show protocol

 

 

or shpro

 

Target account:

general users and

 

 

administrator user

Set

Command to use:

set protocol or

 

 

sepro

 

Target account:

administrator user

The NetWare environment has the following items to be set:

NetWare common: NetWare Mode:

Set in which of the modes, Queue Server Mode or Remote Printer Mode, this network card is to be used.

In AUTO Mode, the Queue Server Mode and the Remote Printer Mode are automatically switched.

48

OkiLAN 3100e Network Card

Image 54
Contents Okilan 3100e Network Card Preface EEC compatibilityTable of contents Administrating Network Printers Utilities InstallationTroubleshooting About Selftest Loop Back Test Network enable/disable setting Introduction Supported environmentsNetwork card functions UtilitiesInstallation Printer installationOkiLAN 320e Network Card Resetting the Network card Printing the Network card settingsOkiLAN 320e Network Card Network Setup Network client server correspondenceSetting up servers Installing as an LPR printerWindows NT4.0 server Setting up printer network settings Installing as a NetBEUI printerSetting up OS network settings Installing the printer driverWindows 2000 server LimitationsPrinter sharing Installing as LPR printer LanguageInstalling as RAW printer Installing as NetBEUI PrinterLimitations Preparation Setting up remote printer modeNetWare3.x file server Creating print queueStarting the print server and connecting the network card Registering a printer in a print queueSetting queue server mode SPX Connections =Message display in remote printer mode Setting up remote printer NetWare 4.x and 5 NDS environmentEnglish You must set this as described otherwise English Setting up the remote printer using Pconsole except NetWare English OkiLAN 320e Network Card Setting up queue server mode Setting up bindery contextNetWare 4.x and 5 bindery environment Setting up print environment to bindery environment SET Bindery Context = DV2.DESIGN.COMPANYRETMessage display in remote printer mode Pconsole IP address setting in Dhcp server environment Setting up the Unix server IP address and host name in the host tablePrinter data base English Setting Control Panel Setting up the clientSetting Windows95/98/Me Setting up a printerNetWare 3.x environment NetWare 4.x and 5 NDS environmentNetWare 4.x and 5 Bindery environment Peer-to-Peer network environmentInstalling printer driver LimitationSetting Windows NT4.0 Workstation Setting Windows 2000 ProfessionalSetting Macintosh Connected Order printers Zone name Printer name OkiLAN 320e Network Card Using administrative tools OkiViewWeb DHCP/BOOTP USB OkiLAN 3100e Network Card Frame Types Telnet Items that can be setDhcp Telnet provides the following commands Setting TCP/IP environment ProcedureLogging Setting NetWare environment DefaultSetting procedure Confirm the current settings OkiPage show protocolSetting EtherTalk environment Display/set the EtherTalk environmentSetting NetBEUI environment Display/set the NetBEUI environmentSetting Snmp environment OKIDATA04106C RETExit Snmp Manager HP OpenView MIBs set values and changing set valuesMIBs set values Set values on printer Set values on network card sideChanging MIBs set values HP JetAdmin software Setting AppleTalk environment Obtaining diagnostic informationPrinter settings Network enable/disableSetting IP address Setting TCP/IPTCP/IP enable/disable Setting subnet maskConfirming the setting Setting NetWareSetting gateway address NetWare enable/disableSetting EtherTalk Setting NetBEUI NetBIOS Resetting network card to defaultEnglish OkiLAN 3100e Network Card Installation OkiView32 for Windows 95/98/ Me/NT4.0/2000Printer information panel Properties Status screen propertiesJob management properties Novell properties Printer options propertiesNetwork properties Device info propertiesSetting Windows 95/98/NT4.0/2000/Me What is Oki LPR Utility?Setting the printer Oki LPR for Windows 95/98/ NT4.0/2000/MeLPR installation and uninstall Printer driver setupInstallation Registering or deleting a printer UninstallSetting LPR printer’s IP address Registering LPR printerPrinting methods Status displayOther functions Print job displayDeleting print jobs Confirming printer status Redirecting print jobsOkiLAN 320e Network Card Troubleshooting Checking status codesUnderstanding status codes Troubleshooting by protocol CommonNetwork functions do not work at all TCP/IP related Cannot print with FTPMask correctly Cannot refer to printer settings or change them with Telnet YES END Does not display printer status correctly on Web Cannot print with LPR Cannot connect in R-Printer ModeNetWare related Print data is ejected in the middleIs printer server’s usable frame type 802.2 or Cannot connect in Q-Server Mode EtherTalk related Cannot print from MacintoshNetBEUI related Cannot print with NetBEUIWhen setting in NetWare3.x environment Important pointsWhen setting in NetWare 4.x and 5 environment When setting Dhcp server environmentWhen printing in Macintosh environment When setting Network menu in the printer When using web serverWhen using Telnet When using Oki LPR UtilityNetwork enable/disable setting About Selftest Loop Back TestOkiLAN 320e Network Card Dhcp OkiLAN 320e Network Card Pconsole Unix Netware 3.x environment OkiLAN 320e Network Card

3100e specifications

The Oki 3100e is a robust and versatile multifunction printer designed to meet the needs of small to medium-sized businesses. Renowned for its reliability, the 3100e excels at delivering high-quality printing at an efficient speed, making it an ideal choice for frequent printing tasks.

One of the standout features of the Oki 3100e is its print technology, which utilizes LED printing instead of the traditional laser technology. This approach results in sharp, precise images and text with vibrant colors. LED technology also contributes to the printer's compact design, allowing it to fit comfortably in office settings without taking up excessive space.

The 3100e supports various media types, including labels, envelopes, and glossy paper, which adds to its versatility. It can handle different paper sizes, ranging from standard A4 to legal sizes, making it suitable for a wide range of printing needs. Additionally, its high capacity for paper handling reduces the frequency of paper refills, ensuring uninterrupted workflow.

In terms of speed, the Oki 3100e is equipped with a powerful processor that enables it to print up to 30 pages per minute. Coupled with a warm-up time of approximately 15 seconds, users can expect quick delivery of documents. This speed is particularly beneficial in fast-paced office environments where time is of the essence.

Another key characteristic of the Oki 3100e is its connectivity options. The printer supports USB and Ethernet connections, allowing for easy integration into existing office networks. This facilitates efficient sharing among multiple users, enhancing productivity.

The Oki 3100e also boasts user-friendly features, including a straightforward control panel and a variety of preset settings. This ensures that users can quickly make adjustments according to their specific printing requirements without hassle. The printer's compact and durable design further ensures longevity, making it a cost-effective solution for businesses looking to minimize operational costs.

In conclusion, the Oki 3100e presents an ideal balance of efficiency, speed, and quality for small to medium-sized business environments. With its advanced LED technology, versatile media handling, and user-friendly interface, the Oki 3100e continues to be a popular choice for those seeking reliable printing solutions that can keep pace with their dynamic needs.