Oki 3100e manual Setting NetWare, Setting gateway address, Confirming the setting

Page 66

BYTE4 using the same procedure above as for SM BYTE1.

Setting gateway address

1.Following the procedure of “Setting subnet mask” above, press MENU1 button until GW BYTE1 is displayed.

2.Change the address by pressing left arrow button or right arrow button. (If you hold the button for a several seconds, it will expedite the address updating.) When the value to be set is displayed, press the ENTER key to finalize it.

3.Press MENU1 button to move to GW BYTE2 setting. You can set up to and including GW BYTE4 using the same procedure above as for GW BYTE1.

4.After setting GW BYTE4, press ON-LINE button. It will enable data to be received in TCP/ IP. To set NetWare ENABLE/DISABLE right after this, press MENU1 button after GW BYTE4 is set.

Confirming the setting

1.Print the menu after completing the setting of each address, to verify that the setting has been made correctly.

2.Press ON-LINE button to set the printer to OFF- LINE and hold the Print Menu button for 2 seconds or longer. When MENU HP PCL6* is displayed, press ENTER button.

3.If the set values printed in the menu print are not correct, set the values again.

Setting NetWare

NetWare enable/disable

To use this network card in the NetWare environment, NetWare must be set to ENABLE on the printer’s operator panel. To set the print server and the remote printer, use the utility and the server.

1.Confirm that the printer is in the idle state from the LCD panel and the indicator.

2.Press ON-LINE button to set the printer to OFF- LINE, and hold MENU1 button for 2 seconds or longer to display PRINT MODE.

60

OkiLAN 3100e Network Card

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Okilan 3100e Network Card Preface EEC compatibilityTable of contents Administrating Network Printers Utilities InstallationTroubleshooting About Selftest Loop Back Test Network enable/disable setting Introduction Supported environmentsNetwork card functions UtilitiesInstallation Printer installationOkiLAN 320e Network Card Resetting the Network card Printing the Network card settingsOkiLAN 320e Network Card Network Setup Network client server correspondenceSetting up servers Installing as an LPR printerWindows NT4.0 server Setting up printer network settings Installing as a NetBEUI printerSetting up OS network settings Installing the printer driverWindows 2000 server LimitationsPrinter sharing Installing as LPR printer LanguageInstalling as RAW printer Installing as NetBEUI PrinterLimitations Preparation Setting up remote printer modeNetWare3.x file server Creating print queueStarting the print server and connecting the network card Registering a printer in a print queueSetting queue server mode SPX Connections =Message display in remote printer mode Setting up remote printer NetWare 4.x and 5 NDS environmentEnglish You must set this as described otherwise English Setting up the remote printer using Pconsole except NetWare English OkiLAN 320e Network Card Setting up queue server mode Setting up bindery contextNetWare 4.x and 5 bindery environment Setting up print environment to bindery environment SET Bindery Context = DV2.DESIGN.COMPANYRETMessage display in remote printer mode Pconsole IP address setting in Dhcp server environment Setting up the Unix server IP address and host name in the host tablePrinter data base English Setting Control Panel Setting up the clientSetting Windows95/98/Me Setting up a printerNetWare 3.x environment NetWare 4.x and 5 NDS environmentNetWare 4.x and 5 Bindery environment Peer-to-Peer network environmentInstalling printer driver LimitationSetting Windows NT4.0 Workstation Setting Windows 2000 ProfessionalSetting Macintosh Connected Order printers Zone name Printer name OkiLAN 320e Network Card Using administrative tools OkiViewWeb DHCP/BOOTP USB OkiLAN 3100e Network Card Frame Types Telnet Items that can be setDhcp Telnet provides the following commands Setting TCP/IP environment ProcedureLogging Setting NetWare environment DefaultSetting procedure Confirm the current settings OkiPage show protocolSetting EtherTalk environment Display/set the EtherTalk environmentSetting NetBEUI environment Display/set the NetBEUI environmentSetting Snmp environment OKIDATA04106C RETExit Snmp Manager HP OpenView MIBs set values and changing set valuesMIBs set values Set values on printer Set values on network card sideChanging MIBs set values HP JetAdmin software Setting AppleTalk environment Obtaining diagnostic informationPrinter settings Network enable/disableSetting IP address Setting TCP/IPTCP/IP enable/disable Setting subnet maskConfirming the setting Setting NetWareSetting gateway address NetWare enable/disableSetting EtherTalk Setting NetBEUI NetBIOS Resetting network card to defaultEnglish OkiLAN 3100e Network Card Installation OkiView32 for Windows 95/98/ Me/NT4.0/2000Printer information panel Properties Status screen propertiesJob management properties Novell properties Printer options propertiesNetwork properties Device info propertiesSetting Windows 95/98/NT4.0/2000/Me What is Oki LPR Utility?Setting the printer Oki LPR for Windows 95/98/ NT4.0/2000/MeLPR installation and uninstall Printer driver setupInstallation Registering or deleting a printer UninstallSetting LPR printer’s IP address Registering LPR printerPrinting methods Status displayOther functions Print job displayDeleting print jobs Confirming printer status Redirecting print jobsOkiLAN 320e Network Card Troubleshooting Checking status codesUnderstanding status codes Troubleshooting by protocol CommonNetwork functions do not work at all TCP/IP related Cannot print with FTPMask correctly Cannot refer to printer settings or change them with Telnet YES END Does not display printer status correctly on Web Cannot print with LPR Cannot connect in R-Printer ModeNetWare related Print data is ejected in the middleIs printer server’s usable frame type 802.2 or Cannot connect in Q-Server Mode EtherTalk related Cannot print from MacintoshNetBEUI related Cannot print with NetBEUIWhen setting in NetWare3.x environment Important pointsWhen setting in NetWare 4.x and 5 environment When setting Dhcp server environmentWhen printing in Macintosh environment When setting Network menu in the printer When using web serverWhen using Telnet When using Oki LPR UtilityNetwork enable/disable setting About Selftest Loop Back TestOkiLAN 320e Network Card Dhcp OkiLAN 320e Network Card Pconsole Unix Netware 3.x environment OkiLAN 320e Network Card

3100e specifications

The Oki 3100e is a robust and versatile multifunction printer designed to meet the needs of small to medium-sized businesses. Renowned for its reliability, the 3100e excels at delivering high-quality printing at an efficient speed, making it an ideal choice for frequent printing tasks.

One of the standout features of the Oki 3100e is its print technology, which utilizes LED printing instead of the traditional laser technology. This approach results in sharp, precise images and text with vibrant colors. LED technology also contributes to the printer's compact design, allowing it to fit comfortably in office settings without taking up excessive space.

The 3100e supports various media types, including labels, envelopes, and glossy paper, which adds to its versatility. It can handle different paper sizes, ranging from standard A4 to legal sizes, making it suitable for a wide range of printing needs. Additionally, its high capacity for paper handling reduces the frequency of paper refills, ensuring uninterrupted workflow.

In terms of speed, the Oki 3100e is equipped with a powerful processor that enables it to print up to 30 pages per minute. Coupled with a warm-up time of approximately 15 seconds, users can expect quick delivery of documents. This speed is particularly beneficial in fast-paced office environments where time is of the essence.

Another key characteristic of the Oki 3100e is its connectivity options. The printer supports USB and Ethernet connections, allowing for easy integration into existing office networks. This facilitates efficient sharing among multiple users, enhancing productivity.

The Oki 3100e also boasts user-friendly features, including a straightforward control panel and a variety of preset settings. This ensures that users can quickly make adjustments according to their specific printing requirements without hassle. The printer's compact and durable design further ensures longevity, making it a cost-effective solution for businesses looking to minimize operational costs.

In conclusion, the Oki 3100e presents an ideal balance of efficiency, speed, and quality for small to medium-sized business environments. With its advanced LED technology, versatile media handling, and user-friendly interface, the Oki 3100e continues to be a popular choice for those seeking reliable printing solutions that can keep pace with their dynamic needs.
Top Page Image Contents