(m)Press the ESC key in [Service printers] to end.
Setting up queue server mode
This network card can serve as a print server and connect Print Queues. Set print server, print queue and printer in the File Server in the same manner as described in “Setting up queue server mode” on page 25.
If the Print Server is not booted up on the file server side, this network card when in AUTO or Queue Server Mode is connected to the file server as a print server.
Note 1: To use the OKIPAGE 14i printer in Queue Server Mode, you must not set the password for the print server. If you set the password, you will not be able to connect this network card as a print server. To use the OKIPAGE 14i in Remote Printer Mode, you can connect it even if the password is set for the print server.
Note 2: This network card does not support banner sheet printing in the Queue Server Mode.
English
NetWare 4.x and 5 bindery environment
To use the bindery service, set the bindery context in the NetWare4.x and 5 environment. Also set the print server and print queue in this bindery context.
Setting up bindery context
For setting the bindery context, you use the set command in the system console of the NetWare server.
Chapter 3 - Network Setup | 25 |