Oki 3100e manual Setting EtherTalk

Page 67

3.Press MENU1 button repeatedly to display NETWORK. After NETWORK is displayed, press ENTER button.

4.TCP/IP is displayed. Press MENU1 button repeatedly to move to NETWARE.

5.When you see that the bottom column of the LCD of the NETWARE is ENABLE* (* indicates that that value is set), press ON-LINE button without doing anything and exit the menu.

6.If the bottom column of the LCD is DISABLE*, press left arrow button or right arrow button to have ENABLE displayed in the LCD bottom column, then press the ENTER button to have ENABLE* displayed. Then press ON-LINE button to exit the menu.

7.Now the NetWare is enabled. Setup the print server and the print queue with utility, etc.

Confirming the setting

1.Print the menu after completing the setting of each item to verify that the setting has been made correctly.

2.Press ON-LINE button to set the printer to OFF- LINE and hold the Print Menu button for 2

English

seconds or longer. When MENU HP PCL6* is displayed, press ENTER button.

3.If the set values printed in the menu print are not correct, set the values again.

Setting EtherTalk

To use this network card in the EtherTalk environment, EtherTalk must be set to ENABLE on the printer’s operator panel.

1.Confirm that the printer is in the idle state from the LCD panel and the indicator.

2.Press ON-LINE button to set the printer to OFF- LINE, and hold MENU1 button for 2 seconds or longer to display PRINT MODE.

3.Press MENU1 button repeatedly to display NETWORK. After NETWORK is displayed, press ENTER button.

4.TCP/IP is displayed. Press MENU1 button repeatedly to move to ETHERTALK.

5.When you see that the bottom column of the LCD of the ETHERTALK is ENABLE* (* indicates that value is set), press ON-LINE button without doing anything and exit the menu.

Chapter 4 - Administrating Network Printers

61

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Okilan 3100e Network Card EEC compatibility PrefaceTable of contents Utilities Installation Administrating Network PrintersTroubleshooting About Selftest Loop Back Test Network enable/disable setting Supported environments IntroductionUtilities Network card functionsPrinter installation InstallationOkiLAN 320e Network Card Printing the Network card settings Resetting the Network cardOkiLAN 320e Network Card Network client server correspondence Network SetupInstalling as an LPR printer Setting up serversWindows NT4.0 server Installing the printer driver Installing as a NetBEUI printerSetting up OS network settings Setting up printer network settingsLimitations Windows 2000 serverPrinter sharing Language Installing as LPR printerInstalling as NetBEUI Printer Installing as RAW printerLimitations Creating print queue Setting up remote printer modeNetWare3.x file server PreparationRegistering a printer in a print queue Starting the print server and connecting the network cardSPX Connections = Setting queue server modeMessage display in remote printer mode NetWare 4.x and 5 NDS environment Setting up remote printerEnglish You must set this as described otherwise English Setting up the remote printer using Pconsole except NetWare English OkiLAN 320e Network Card Setting up bindery context Setting up queue server modeNetWare 4.x and 5 bindery environment SET Bindery Context = DV2.DESIGN.COMPANYRET Setting up print environment to bindery environmentMessage display in remote printer mode Pconsole IP address setting in Dhcp server environment IP address and host name in the host table Setting up the Unix serverPrinter data base English Setting up a printer Setting up the clientSetting Windows95/98/Me Setting Control PanelNetWare 4.x and 5 NDS environment NetWare 3.x environmentPeer-to-Peer network environment NetWare 4.x and 5 Bindery environmentLimitation Installing printer driverSetting Windows 2000 Professional Setting Windows NT4.0 WorkstationSetting Macintosh Connected Order printers Zone name Printer name OkiLAN 320e Network Card OkiView Using administrative toolsWeb DHCP/BOOTP USB OkiLAN 3100e Network Card Frame Types Items that can be set TelnetDhcp Telnet provides the following commands Procedure Setting TCP/IP environmentLogging Default Setting NetWare environmentConfirm the current settings OkiPage show protocol Setting procedureDisplay/set the EtherTalk environment Setting EtherTalk environmentDisplay/set the NetBEUI environment Setting NetBEUI environmentOKIDATA04106C RET Setting Snmp environmentExit MIBs set values and changing set values Snmp Manager HP OpenViewMIBs set values Set values on network card side Set values on printerChanging MIBs set values HP JetAdmin software Obtaining diagnostic information Setting AppleTalk environmentNetwork enable/disable Printer settingsSetting subnet mask Setting TCP/IPTCP/IP enable/disable Setting IP addressNetWare enable/disable Setting NetWareSetting gateway address Confirming the settingSetting EtherTalk Resetting network card to default Setting NetBEUI NetBIOSEnglish OkiLAN 3100e Network Card OkiView32 for Windows 95/98/ Me/NT4.0/2000 InstallationPrinter information panel Status screen properties PropertiesJob management properties Device info properties Printer options propertiesNetwork properties Novell propertiesOki LPR for Windows 95/98/ NT4.0/2000/Me What is Oki LPR Utility?Setting the printer Setting Windows 95/98/NT4.0/2000/MePrinter driver setup LPR installation and uninstallInstallation Registering LPR printer UninstallSetting LPR printer’s IP address Registering or deleting a printerStatus display Printing methodsPrint job display Other functionsDeleting print jobs Redirecting print jobs Confirming printer statusOkiLAN 320e Network Card Checking status codes TroubleshootingUnderstanding status codes Common Troubleshooting by protocolNetwork functions do not work at all Cannot print with FTP TCP/IP relatedMask correctly Cannot refer to printer settings or change them with Telnet YES END Does not display printer status correctly on Web Print data is ejected in the middle Cannot connect in R-Printer ModeNetWare related Cannot print with LPRIs printer server’s usable frame type 802.2 or Cannot connect in Q-Server Mode Cannot print from Macintosh EtherTalk relatedCannot print with NetBEUI NetBEUI relatedImportant points When setting in NetWare3.x environmentWhen setting Dhcp server environment When setting in NetWare 4.x and 5 environmentWhen printing in Macintosh environment When using Oki LPR Utility When using web serverWhen using Telnet When setting Network menu in the printerAbout Selftest Loop Back Test Network enable/disable settingOkiLAN 320e Network Card Dhcp OkiLAN 320e Network Card Pconsole Unix Netware 3.x environment OkiLAN 320e Network Card

3100e specifications

The Oki 3100e is a robust and versatile multifunction printer designed to meet the needs of small to medium-sized businesses. Renowned for its reliability, the 3100e excels at delivering high-quality printing at an efficient speed, making it an ideal choice for frequent printing tasks.

One of the standout features of the Oki 3100e is its print technology, which utilizes LED printing instead of the traditional laser technology. This approach results in sharp, precise images and text with vibrant colors. LED technology also contributes to the printer's compact design, allowing it to fit comfortably in office settings without taking up excessive space.

The 3100e supports various media types, including labels, envelopes, and glossy paper, which adds to its versatility. It can handle different paper sizes, ranging from standard A4 to legal sizes, making it suitable for a wide range of printing needs. Additionally, its high capacity for paper handling reduces the frequency of paper refills, ensuring uninterrupted workflow.

In terms of speed, the Oki 3100e is equipped with a powerful processor that enables it to print up to 30 pages per minute. Coupled with a warm-up time of approximately 15 seconds, users can expect quick delivery of documents. This speed is particularly beneficial in fast-paced office environments where time is of the essence.

Another key characteristic of the Oki 3100e is its connectivity options. The printer supports USB and Ethernet connections, allowing for easy integration into existing office networks. This facilitates efficient sharing among multiple users, enhancing productivity.

The Oki 3100e also boasts user-friendly features, including a straightforward control panel and a variety of preset settings. This ensures that users can quickly make adjustments according to their specific printing requirements without hassle. The printer's compact and durable design further ensures longevity, making it a cost-effective solution for businesses looking to minimize operational costs.

In conclusion, the Oki 3100e presents an ideal balance of efficiency, speed, and quality for small to medium-sized business environments. With its advanced LED technology, versatile media handling, and user-friendly interface, the Oki 3100e continues to be a popular choice for those seeking reliable printing solutions that can keep pace with their dynamic needs.
Top Page Image Contents