Primera Technology LX400 user manual Top of Form TOF, Cut Position

Page 35

TOC

INDEX

Left Margin Offset

This will be factory calibrated. If fine tuning is needed, increase this setting to move the image right on the label; decrease this setting to move the image to the left on the label. The unit of measure is 0.1mm.

Top of Form (TOF)

This setting allows you to fine tune the print starting position on your label stock. This will be factory calibrated. If fine tun- ing is needed, increase this value to move the image down on the label. Decrease this value to move the image up the label. The unit of measure is 0.1mm.

Click the Test button to send a test print to the printer that will help you adjust the TOF and Left Margin Offset. The printer will print the pattern shown. Adjust the values so that both black bars print on the label with no white space on the label and no ink on the liner.

Tear Off Position

+-

LEFT OFFSET

(10 units)

TOF

1.0 mm

+

-

If Output Mode (described earlier in this section) is set to Present, the printer will present your labels over the Tear Bar for easy removal. This tear off position is set at the factory. If fine tuning is needed to align the break in your label stock over the Tear Bar, increase this setting to eject the label further; decrease this setting to eject the label stock less. The unit of measure is 0.1 mm.

Cut Position

If a label cutter attachment is connected to the printer you can fine tune the cut position between the labels. Increase this value to move the label further out before the cut; decrease this value to eject the label stock less before the cut.

Printing Using a PC 31

Page 34 Page 36
Image 35
Page 34 Page 36
Contents All rights reserved Color Label PrinterPrinting History Table of Contents Interactive Feature Choosing a Good Location Thank YOU…Starter roll of high gloss label stock Unpacking and InspectionIdentifying the Parts Minimum Macintosh Specifications Computer SpecificationsMinimum PC Specifications Installing the MAC Software Installing the PC SoftwareIf you are using a PC Connecting PowerConnecting the USB Cable / Installing the Printer Driver If you are using Macintosh Installing Label Stock Stock Guide Rollers Adjusting the Label Stock TOF TOP of Form Sensor Through Hole Labels Circular LabelsUsing FAN-FOLD Label Stock For Macintosh and PC Installing the INK CartridgeIf using a PC If using a MacAligning the INK Cartridge TOC Index Creating a label Using NicelabelTOC Index TOC Index TOC Index TOC Index TOC Index Creating Barcodes in Nicelabel RSS TOC Index To find Driver Settings Printer Driver Settings PCPortrait Landscape Paper SizeInk Saturation Color MatchingClean/Purge Clean/Change Cartridge & Check Ink LevelsDetails/Print Counter Change CartridgeEnable Bi-di Printing Output ModeCut Position Top of Form TOFPrinting on a MAC from Adobe Illustrator Printing Using a MacintoshTOC Index TOC Index TOC Index TOC Index Printing from Other Applications Creating Barcodes on a MACPrinter Driver Settings MAC Color Type Intensity Clean Cartridge Config. UtilityLabel Offsets Tear Off Position Sensor Type Image is Vertically Offset Solving Registration ProblemsImage is printing horizontally offset TOC Index Creating a Full Bleed Print Clearing a Label JAM Cleaning the PrinterSource Location Cleaning the INK CartridgeTechnical Support Label and Roll Specifications Index Roll SpecificationsPower Requirements Print ResolutionsAccessories Indicator LightsIndex
Top Page Image Contents