Primera Technology LX400 user manual Sensor Type

Page 47

TOC

INDEX

Sensor Type

Sensor Type refers to the method the printer will use to detect the print starting position for each label. If you are using standard die-cut labels or Through-hole label material where a hole is punched through each label for alignment purposes use the Through-hole/Die-Cutsetting. Use Reflective for black stripe sensing label material where a pre-printed line on the back of the label stock indicates the break between labels. If you have continuous stock with no die-cut, reflective mark or holes set the sensor type to Continuous Feed. This will turn off the stock sensor.

Output Mode

Do not present (use with Rewinder). The label stock does not move after the last label is printed. This means that part of the last label printed is still in the printer. This should be used only if you have a label rewinder attached.

Present (Default). This setting will cause the printer to feed the last label printed forward so that it and the previously printed labels can be torn off using the tear bar. This will occur only if there are no other print jobs in queue.

Cut (using optional cutter). Use this setting only if you have the label cutter attachment (Primera Part # 074263)

Printing Using a Macintosh 43

Image 47
Contents All rights reserved Color Label PrinterPrinting History Table of Contents Interactive Feature Choosing a Good Location Thank YOU…Starter roll of high gloss label stock Unpacking and InspectionIdentifying the Parts Minimum Macintosh Specifications Computer SpecificationsMinimum PC Specifications Installing the MAC Software Installing the PC SoftwareIf you are using a PC Connecting PowerConnecting the USB Cable / Installing the Printer Driver If you are using Macintosh Installing Label Stock Stock Guide Rollers Adjusting the Label Stock TOF TOP of Form Sensor Through Hole Labels Circular LabelsUsing FAN-FOLD Label Stock For Macintosh and PC Installing the INK CartridgeIf using a PC If using a MacAligning the INK Cartridge TOC Index Creating a label Using NicelabelTOC Index TOC Index TOC Index TOC Index TOC Index Creating Barcodes in Nicelabel RSS TOC Index To find Driver Settings Printer Driver Settings PCPortrait Landscape Paper SizeInk Saturation Color MatchingClean/Purge Clean/Change Cartridge & Check Ink LevelsDetails/Print Counter Change CartridgeEnable Bi-di Printing Output ModeCut Position Top of Form TOFPrinting on a MAC from Adobe Illustrator Printing Using a MacintoshTOC Index TOC Index TOC Index TOC Index Printing from Other Applications Creating Barcodes on a MACPrinter Driver Settings MAC Color Type Intensity Clean Cartridge Config. UtilityLabel Offsets Tear Off Position Sensor Type Image is Vertically Offset Solving Registration ProblemsImage is printing horizontally offset TOC Index Creating a Full Bleed Print Clearing a Label JAM Cleaning the PrinterSource Location Cleaning the INK CartridgeTechnical Support Label and Roll Specifications Index Roll SpecificationsPower Requirements Print ResolutionsAccessories Indicator LightsIndex