TOC | INDEX |
Config. Utility
Click on the Config. Utility to access the following screen. A description of each setting on this screen is below.
Clean Cartridge
If it has been more than 48 hours since your last print or if your print quality has deteriorated with bands or lines it is recommended that you clean the cartridge. This is done by clicking the Clean Cartridge button.
Note: You will be prompted to load label stock of 4"x 4" (101.6 mm x 101.6mm) or larger, into the printer. If you have stock of this size or larger, simply click OK. If not see Section 2I for instructions on loading a test sheet to complete the purge print.
Change Cartridge
Click the Change Cartridge button to move the cartridge into position for easy access for replacement. For more information on this see Section 2H. When installing a cartridge you will be prompted to align your cartridge as described later in this section.
40Printing Using a Macintosh