Primera Technology LX400 user manual Output Mode, Enable Bi-di Printing

Page 34

TOC

INDEX

Output Mode

Do not present (use with Rewinder). The label stock does not move after the last label is printed. This means that part of the last label printed is still in the printer. This should be used only if you have a label rewinder attached.

Present (Default). This setting will cause the printer to feed the last label printed forward so that it and the previously printed labels can be torn off using the tear bar. This will occur only if there are no other print jobs in queue.

Cut (using optional cutter). Use this setting only if you have the label cutter attachment (Primera Part # 074263)

Enable Bi-di Printing

This setting defaults to Yes for fastest printing. When enabled you will be required to perform an alignment print after a new cartridge is installed.

Offsets

If your label is printing horizontally or vertically offset (printing on the liner or with white space left on the label) use these offset setting to adjust the position of the print on the label. Click Offsets... to reveal the properties button. Click Properties. The following screen will appear. Refer to the diagram to determine which direction to move the image, tear off position or cut position.

30Printing Using a PC

Image 34

Contents Color Label Printer All rights reservedPrinting History Table of Contents Interactive Feature Thank YOU… Choosing a Good LocationUnpacking and Inspection Starter roll of high gloss label stockIdentifying the Parts Minimum PC Specifications Computer SpecificationsMinimum Macintosh Specifications Installing the PC Software Installing the MAC SoftwareConnecting the USB Cable / Installing the Printer Driver Connecting PowerIf you are using a PC If you are using Macintosh Installing Label Stock Stock Guide Rollers Adjusting the Label Stock TOF TOP of Form Sensor Circular Labels Through Hole LabelsUsing FAN-FOLD Label Stock If using a Mac Installing the INK CartridgeIf using a PC For Macintosh and PCAligning the INK Cartridge TOC Index Using Nicelabel Creating a labelTOC Index TOC Index TOC Index TOC Index TOC Index Creating Barcodes in Nicelabel RSS TOC Index Printer Driver Settings PC To find Driver SettingsPaper Size Portrait LandscapeColor Matching Ink SaturationClean/Change Cartridge & Check Ink Levels Clean/PurgeChange Cartridge Details/Print CounterOutput Mode Enable Bi-di PrintingTop of Form TOF Cut PositionPrinting Using a Macintosh Printing on a MAC from Adobe IllustratorTOC Index TOC Index TOC Index TOC Index Creating Barcodes on a MAC Printing from Other ApplicationsPrinter Driver Settings MAC Color Type Intensity Config. Utility Clean CartridgeLabel Offsets Tear Off Position Sensor Type Solving Registration Problems Image is Vertically OffsetImage is printing horizontally offset TOC Index Creating a Full Bleed Print Cleaning the Printer Clearing a Label JAMTechnical Support Cleaning the INK CartridgeSource Location Label and Roll Specifications Roll Specifications IndexIndicator Lights Print ResolutionsAccessories Power RequirementsIndex