9 |
|
|
| ENGLISH |
INSPECTION | Before installation, please check your monitor for physical damages which may have | |||
| occurred during transport, and also check that the package includes all the items below: | |||
| ´ Your new monitor (including pedestal) | |||
| ´ Power cord |
| ||
| ´ User manual |
| ||
| ´ Signal cable (optional) | |||
| In case any items are missing or damaged, please contact your dealer or supplier. | |||
UNPACKING |
|
|
|
|
| This chapter explains in detail how to safely unpack and position your new display: | |||
| Caution: please remember that your monitor weights approximately: | |||
| MGD 203 | 24 Kg (52.9 lbs); | ||
| MGD 403 | 32 Kg (70.5 lbs); | ||
| therefore to avoid injury, you should not lift it by yourself: two people are required. | |||
| 1. | To safely lift the monitor, position one hand below the top front mask and the other | ||
|
|
| one below the bottom of the backcover. | |
| 2. | Place the monitor only on a strong table or a desk. Avoid placing your monitor on | ||
|
|
| top of a computer. | |
Suggestions !
Important !
To minimise glare and reduce eye fatigue, it is recommended to place your monitor in the following positions:
´avoid direct sunlight or other bright light source;
´keep the screen lower than your eyes (with an angle of 20° respect to the ideal horizontal line;
´set the monitor to ”1 gun mode”, when full brightness is not required;
Retain your original packing, which is ideal and safe, in case you need to transport your monitor in the future.
The MGD 203/MGD 403 monitor is equipped with a tilt swivel base which will allow you to position the display at a comfortable viewing angle.
The base rotates 140° to the right and to the left (a stop prevents further rotation) and 5° top / forward plus 15° top / backwards.
A duly designed metal bracket is also available as option for both MGD203 and MGD403 when a ceiling or trolley mount application is requested.