ENGLISH | 4 |
|
|
The monitor will automatically sychronise within a wide range of scanning frequencies and determine the specific operating mode.
Monitor behaviour (degauss & reset), image quality and screen geometry adjustments can be changed or selected via the hardware OSD by means of the front panel
Your new monitor provides special features as:
´Very high contrast, high definition image.
´Digital brightness uniformity control (higher than 90%).
´Automatic correction of the effect of the horizontal magnetic field.
´Digital correction of geometric distortions.
´Automatic calibration (with optional light probe and software tool).
´Incredible high contrast (750 cd/sqm for 21” - 900 cd/sqm for the 17”).
´Universal power supply.
´Interactive On Screen Display with a rich set of functions for easy installation and cus-
tomization.
´ Fully autoscan from 30 to 95 KHz (Horizontal Frequency) 50 to 170 Hz (Vertical Frequency).
´Most common video modes already factory stored in the monitor memory.
´Large number of free memory locations to store up to 16
´Full compatibily with all mono and color video cards, progressive and interlaced timing
´Black Level Stabilization for quick
´Integrated Ambient Light Compensation control function.
´RS 485 - like ’Daisy chain’ bus connection (up to 15 monitors), allows simultaneous adjustment of each enabled monitor from each monitor’s keyboard.
´RS 232 serial connection to host computer or service laptop.
´Large number of functions available through the interactive On Screen Display, (including also Hours of Operating, Horizontal Scan Rate, Vertical Refresh Rate) to allow easy installation and optimal operation.
´Orbiting function to increase CRT lifetime.
´
´Flexible inputs selection: 3 BNCs (for mono drivers), 5 BNCs or 15 pin
´Six user selectable combinations of max Brightness and max Contrast
(5 preset + 1 available to the user).
´Direct key access for most commonly used user commands: BRIGHTNESS up/down, CONTRAST up/down, REF. SETTING, USER SETTING, USER STORE, KEYBOARD UNLOCK.
´Automatic Brightess Control programmable.
´
´Number of hours of operation recorded and readable at any time.
´Power Saving (VESA DPMS) function according to latest Environmental
Regulations & Reccomendations, including also the Power Factor (IEC