Philips MGD403, MGD203 user manual ON-SCREEN-DISPLAY Special Keys Functions, Keylock ALL

ENGLISH 16

´KEYBOARD UNLOCK

While “Key Lock” warning message is displayed on screen, pressing ALL front keys together, the LOCAL KEYBOARD LOCK FUNCTION DIS- ABLED shell be locally executed in the monitor.

The window shown below will be displayed on all enabled units (if daisy chain on) and will disappear after 3 seconds time-out.

MODE

KEYBOARD UNLOCK

´OSD GLOBAL MENU

Pressing A Brightness - AND B Contrast + together, the item of the ‘GLOBAL MENU’ menu is invoked locally. The second line shows the new key functionality.

Due to the fact that the number of items can be quite high, in order to avoid a too large menu_window, only four of them are displayed. When the last displayed item is highlighted, scrolling is used to show the next item.

GLOBAL MENU

SEL EXIT - +

3 - GUNS

DEGAUSS

KEYLOCK ALL

ABC REDUCED

REF. SETTING 1

LOCAL MENU

ON-SCREEN-DISPLAY SPECIAL KEYS FUNCTIONS

OVERVIEW FOR OSD KEY FUNCTIONALITY

After the activation of OSD window, the following functions are associated to the different keys:

FUNCTION		KEY	DESCRIPTION
´Select		A Brightness -	Selects and executes the OSD FUNCTION highlighted
			When the highlighted item is blinking, store the new parameter value
´Exit		A Brightness +	Escapes from the On-Screen-Display Menu Function
´Adjust		B Contrast -	When main menu or sub-menu is active, it allows to move or scroll to the previous (upper) item
			When the highlighted item is blinking, decrements the relevant parameter value.
´Adjust		B Contrast +	When main menu or sub-menu is active, it allows to move or scroll to the following (lower) item
			When the highlighted item is blinking, increments the relevant parameter value.
Note:	When in GLOBAL MENU mode, if no keys are pressed, the window shall disappear in 30 sec.
	When in LOCAL MENU mode, if no keys are pressed, the window shall disappear in 5 min.

OSD DAISY-CHAIN OPERATION WARNING WINDOW

If a DAISY CHAINED function is executed and the DAISY CHAIN MODE is ENABLED the Daisy-Chain ‘Sense-Line’ is tested. If the ‘Sense-Line’ is low, this means that some other unit is already ‘Master’ and have previously engaged the Line.

In this case a waiting time e.g. 1 second is engaged until the sense-line is freed.

If the waiting time is longer than this maximum waiting a pop-up window appears locally for 3 seconds with warning message.

MODE

DAISY CH. BUSY