Philips 55PL9773, 44PL9773, 44PL9522 setup guide When using Dual Screen

Changing Channels/Input Sources and Repositioning Dual Screen/PIP

G

When using Dual Screen:
A light-colored border indicates the selected
screen. If the screen whose channel or input
1 source you want to change is not selected,
press the Cursor Right or Left button to select
the desired screen.
To change channels in the selected screen, press
2 Or:the CH (Channel Selection) + or – buttons.
To change the input source, first press the
Source button. Then, within 6 seconds, press
3 the Cursor Up or Down until your desired	3
input source is highlighted. Press the OK but-
ton to confirm. The desired input source
appears in the selected screen.				3
NOTE: If the list of input sources “times out”
(leaves the screen) before you can make your
	1			1
selection, press the Source button again to dis-		x
play the list again.								TV
When using Large or Small PIP:								AV1:DVD
				3		Source	OK	AV2:Recorder
When the PIP window is on screen, press the								AV3:SAT
					2			AV4:HD
Cursor Up or Down button to select either the	3							AV5:Other
								AV6:HD
1 main or PIP screen. A light-colored border sur-								SIDE:Camera
rounds the PIP screen when it is selected. The
PIP screen must be selected before its channel
or input source can be changed.
To change channels in the PIP screen, press
2 Or:the CH (Channel Selection) + or – buttons.
To select a different input source, first press
the Source button. Then, within 6 seconds,
3 press the Cursor Up or Down until your
desired input source is highlighted. Press the
OK button to confirm. The desired input
source appears in the PIP screen.
NOTE: If the list of input sources “times out”
(leaves the screen) before you can make your				1
selection, press the Source button again to dis-								TV
play the list again.								AV1:DVD
						Source	OK	AV2:Recorder
To reposition the PIP screen:	3			3				AV3:SAT
								AV4:HD
Press the Cursor Up or Down button. The ball				4				AV5:Other
and direction indicator appear on screen.								AV6:HD
4 Within 6 seconds, press the OK button. A mul-								SIDE:Camera
tidirectional symbol appears on screen.	5	x		5
NOTE: If the ball and direction indicator				5
“time out” (leave the screen) before you press
the OK button, simply press the Cursor Up or
Down button again.				3
Press the Cursor Up, Down, Left, or Right but-	1
				4
tons to move the PIP window to the desired
5 location.
Press the OK button. The ball and direction	3		2	6
indicator reappear and “time out” (leave the
6 screen) in about 6 seconds.	4
	5

59