Panel Jack Compatibility Information

1 AV 1 Input Jacks

Signals accepted: NTSC (480i).

Inputs available: YPbPr, S-Video (Y/C), and CVBS, plus audio left and right.

Use only one of the video signal inputs at a time.

If you should forget and have more than one type of signal connected, the set will automatically show the one of better quality: CVBS—good, S-Video—bet- ter, and YPbPr—best. For sound, connections must be made to the AV1 audio inputs.

2 MON OUT Output Jacks

Provide video and audio output signals from all TV when those sources are being viewed on the main screen. Output from the audio L/R jacks is at a fixed volume level; changing the TV volume does not affect them. Adjust the volume at your external home cinema system.

3 AV 2 Input Jacks

Signals accepted: NTSC (480i).

Inputs available: S-Video (Y/C) and CVBS, plus audio left and right.

Use only one of the video signal inputs at a time. If you should forget and have both types of signal connected, the set will automatically show the S-Video, since it is of better quality than CVBS. For sound, connections must be made to the AV2 audio inputs.

AV4 AV3 SUB OUTAV2MONAV1SERVICE 12C OUT

GS-VIDEO

R L

Pr Pb

R L

GS-VIDEO

R L

		DVI			9
		DVI
V	AV6
Y
V		R	L
		R	L		8
		R	L		8
V
	AV5
		RGB+HV			7
STANDARD/		Pr	Pb	Y
STANDARD/
HD INPUTS					TUNER
					TUNER
STANDARD/		Pr	Pb	Y
STANDARD/

HD INPUTS	11

SUB OUT Output Jack

Provides a signal to an external powered subwoofer.

AV3 Input Jacks	10
AV3 Input Jacks
Signals accepted: NTSC (480i), 480p, 720p, and
1080i, plus audio left and right.
Inputs available: YPbPr, plus audio. For sound,
connections must be made to the AV3 audio inputs.

CENTER CHANNEL AMP INPUT

INT

EXT

Jack Panel Located on the Left Side of the TV

6 AV4 Input Jacks

Signals accepted: NTSC (480i), 480p, 720p, and 1080i, plus audio left and right.

Inputs available: YPbPr, plus audio. For sound, connections must be made to the AV4 audio inputs.

7 TUNER Input Jack

Signals accepted: RF modulated NTSC.

Inputs available: 75Ω RF coaxial.

8 AV5 Input Connectors

Signals accepted: NTSC (480i), 480p, 720p, 1080i, and 1s1111111111111111111111111111111VGA plus audio left and right.

Inputs available: RGB+HV. For sound, connec- tions must be made to the AV5 audio inputs.

9 AV6 Input Connectors

Signals accepted: Digital only (TMDS [Transition Minimized Differential Signaling] encoded, uncom- pressed); DVI 480i, 480p, 720p, and 1080i, plus audio left and right.

Inputs available: DVI TMDS, plus audio. For sound, connections must be made to the AV6 audio inputs.

Intended use of the input: digital set-top boxes and inputs from other digital video devices.

NOTE: This DVI jack is not for computer con- nections. VGA cannot be connected.

Speaker Terminals and

EXT(ernal)/INT(ernal) Speaker Switch

Located on the Back Left Side of the TV

Definitions:

NTSC—National Television System Committee.

CVBS—labeled “V,” provides a small step up in quality from the Tuner (RF) input. Called Composite Video.

S-Video(Y/C)—provides better picture quality than CVBS. Separates the signal into color and brightness.

YPbPr—provides the best quality video signal. Called Component Video Input, the signal is split into three parts, two color and one brightness.

10	CENTER CHANNEL AMP	11	SIDE JACK PANEL
	INPUT Click-fit Terminals		Signals accepted: NTSC (480i).
	Provides speaker-wire input termi-		Inputs available: S-Video (Y/C)
	nals for connection of an external		and CVBS, plus audio left and
	home-cinema surround-sound sys-		right.
	tem amplifier. For this use, set the		Output available: Headphone.
	switch to “EXT,” and the TV		Only one of the inputs can be used
	speakers become the center speak-		at a time. Select the Side source,
	ers for the home-cinema surround-		and the TV detects the input to
	sound system.		which you have connected.
	NOTE: If no audio is heard from		Connections must be made to the
	the set, check to make sure the		audio inputs for sound.
	Center Channel Amp switch is in
	the INT position. This switch
	should be in the EXT position
	only when an external center
	channel input is connected to the
	Click-fit Terminals.