Resetting the Lamp’s Lifetime Counter
After installing a new lamp in the TV, you need to enter the “Lamp rating” list in the on- screen menu and select the alphabetical code that is provided with the lamp. The recom- mended Philips replacement Lamp is rated for 6000 hours, an F rating
The next step is to use the “Lamp replaced control” to tell the TV that you have installed a new lamp. This control resets the Lifetime Counter to 0 for the new lamp and begins keeping track of the lifetime of the new lamp.
1 Press the Menu button on the remote control to display the
2 Press the Cursor Down button to select
TV 
Settings
Demo
Install
Picture Sound Features Channels
3
TV
General Clock Source
Settings 
Demo
Install
General Clock Source
Settings
Menu background 
Surf 
Dual screen format 
“Settings.”
9
5
Freeze format 
3
7
8
General |
4 Press the Cursor Down button repeat- edly until “Lamp rating” is selected.
5 Press the Cursor Right button to enter the rating list.
6 If necessary, press the Cursor Down button as many times as necessary to select the letter for your replacement lamp.
7 Press the Cursor Left button to return to the “General” menu.
8 Press the Cursor Down button to select “Lamp replaced.”
9 Press the OK button to confirm that
9
2
4
1
6
10 8
Settings |
|
|
|
Reset AV | Settings |
|
|
Caption | service |
|
|
| OSD |
|
|
Change PIN |
| A | |
| B | ||
Subwoofer |
| ||
| C | ||
Lamp Rating |
| ||
| |||
Lamp Replacement |
| ||
|
| ||
General
Settings
A
B
C
General
you have changed the lamp.
10Press the Menu button to remove the
Settings
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Press OK after you replaced the light bulb.
Lamp Rating
Lamp Replacement OK
HELPFUL HINTS
•One hundred hours before the lamp reaches the end of its life, a warning message will appear on screen to alert you. Changing the lamp at this point is recommended for optimal performance.
•A blinking orange light on the front of the set means that the lamp is not work- ing anymore and needs to be replaced.
73