Philips 44PL9522, 44PL9773, 55PL9773 setup guide Connecting a Standard DVD Player, Helpful Hints

Connecting a Standard DVD Player

1 Using Audio/Video cables, connect to the YPbPr jacks on the back of the standard DVD player and to the AV1 YPbPr jacks on the back of the TV.

2 Using Stereo Audio cables, connect to the AUDIO OUT jacks on the back of the DVD player and to the correspon- ding AV1 audio (L and R) jacks on the back of the TV.

3 Press the Source button on the remote control to access the Source list.

4 Press the Cursor Up or Down button to select the AV1 input source.

Back of TV	C
	2
2	SERVICE 1
			G S-VIDEO				1
			R	L	V	AV6
			Pr	Pb	Y
	MON	OUT	R	L	V		R	L
							R	L
	AV2		R	L	V
			G S-VIDEO			AV5
	SUB OUT						RGB+HV
	AV3		R	L	HD INPUTS		Pr	Pb	Y
					STANDARD/
									TUNER
	AV4				STANDARD/		Pr	Pb	Y
			R	L	HD INPUTS

5 Press the OK button to confirm your choice. The set is now switched to the AV1 input source for the viewing of pro- grams from the DVD player.

HELPFUL HINTS

• If you do not know whether your DVD

player is standard or progressive scan, you

can connect it to either AV3 or AV4, and the

TV will automatically determine the type of

output.

• To simplify making connections, the con-

nectors on audio and video cables are often

color coded to match the colors on TV

jacks: green for Y, blue for Pb, and red for

Pr; also red for right audio, and white for

DIGITAL AUDIO OUT

PCM-MPEG2-Dolby Digital-DTS

COAXIAL OPT OUT SUB WF OUT

TV

Source OK AV1:Other

AV2:Other

AV3:Other

AV4:Other

AV5:Other

AV6:Other

SIDE:Other

1			1
2			2
R	L	(CVBS)	PR/CR	PB/CB	Y	(Y/C)
	AUDIO OUT	VIDEO OUT		VIDEO OUT		S-VIDEO OUT

Back of Standard DVD Player

(example only)

DVD619	DVD/CD PLAYER	OPEN/CLOSE	STOP	PLAY	PAUSE
STANDBY-ON
			PREV		NEXT

left audio.

• The names for the component video jacks

may differ depending on the DVD player or

accessory digital source equipment used.

For example, besides YPbPr, you may see

R-Y/B-Y/Y; or CrCbY. Although abbrevia-

tions and terms may vary, the letters B and

R stand for the blue and red color compo-

nent signal connectors, respectively, and Y

indicates the luminance signal. If necessary,

refer to the user manual for your DVD or

digital accessory for more information.

• If you experience difficulties receiving

sound with a DVD disc, check the sound

settings through the DVD disc’s menu.

3

4

5

4

13