Philips Network Adaper owner manual When finished, press the button to highlight Rcvr Lockout

Net 1Card IB 2/15/00 12:18 PM Page 26

TRANSMITTER CONTROL

RCVR CHANNEL allows you to turn the Receiver TVs to the channel you select or leave them at their

“CURRENT” setting. Leaving them at “CURRENT” allows the Receiver TV to change channels, even the sys- tem is “LOCKED.” The default setting is “CURRENT.”

BEGIN

If not already in the “TRANSMITTER CON- TROL” menu, press the D button on the remote con- trol. Then press the ▼ button until “RCVR CHAN- NEL” is highlighted.

Press the – (◀) or + (♣) button to select “CUR- RENT,” channels 1 to 125 (if Cable mode is selected),

“AUX,”or “S-VIDEO,” or channels 2 - 69 (if Cable mode is not selected). You can also use the Number but- tons to select a number. If broadcasting from a VCR or Camcorder, select “AUX” or “S-VIDEO,” depending on how it is hooked up. See pages 14 - 17 for details.

When finished, press the ▼ button to highlight “RCVR LOCKOUT.”

TRANSMITTER CONTROL
ADDRESS TYPE	BROADCAST
BROADCAST	ALL SETS
RCVR POWER	CURRENT
RCVR VOLUME	CURRENT
RCVR CHANNEL	CURRENT
RCVR LOCKOUT	UNLOCKED
UPDATE RCVR TVS

TRANSMITTER CONTROL

RCVR LOCKOUT allows you to lock the Receiver TVs so that they can only be adjusted by the Transmitter TV. Or you can leave the Receiver TVs “UNLOCKED,” so that they can be adjusted at each

TV. The default setting is “UNLOCKED.”

“UPDATE RCVR TVS” transmits all your selections to the Receiver TVs.

BEGIN

If not already in the “TRANSMITTER CON- TROL” menu, press the D button on the remote con- trol. Then press the ▼ button until “RCVR LOCK- OUT” is highlighted.

Press the – (◀) or + (♣) button to select

“UNLOCKED” or “LOCK.”

Next, press the ▼ button to highlight “UPDATE RCVR TVS.” Press the – (◀) or + (♣) button to send all the commands you have selected. You must com- plete “UPDATE RCVR TVS” or the Receiver TVs will not be updated.

Note: if you select “LOCK” in “RCVR LOCKOUT,” both “ADDRESS TYPE” and “GROUP IDS” will be highlighted in yellow and cannot be changed until the TVs are “UNLOCKed” or “RESTOREd”. (For options under “RCVR LOCKOUT,” see page 28.)

When finished, press the ▼ button to highlight “EXIT.” Then press the “M” button. Or you can exit by simply pressing the RECALL button when you're done.

YOU CAN NOW TRANSMIT YOUR MESSAGE.

EXIT MENU
	TRANSMITTER		CONTROL
+/- OR DIGITS TO ADDRESS TYPE			BROADCAST
	BROADCAST		ALL SETS
	RCVR POWER		CURRENT
	RCVR VOLUME		CURRENT
	RCVR CHANNEL	40
	RCVR LOCKOUT		UNLOCKED
	UPDATE RCVR TVS
	EXIT MENU
	+/- OR DIGITS TO CHANGE

TRANSMITTER CONTROL

ADDRESS TYPE	BROADCAST
BROADCAST	ALL SETS
RCVR POWER	ON
RCVR VOLUME	CURRENT
RCVR CHANNEL	40
RCVR LOCKOUT	LOCK

UPDATE RCVR TVS

EXIT MENU

PRESS +/- TO CHANGE

TRANSMITTER CONTROL

*** (P–C)	CTRL LOCK***
BROADCAST		ALL SETS
RCVR POWER		ON
RCVR VOLUME		CURRENT
RCVR CHANNEL		40
RCVR LOCKOUT		LOCK
UPDATE RCVR TVS
EXIT MENU

PRESS +TO UPDATE RCVRS

26

27