Net 1Card IB 2/15/00 12:18 PM Page 32
ON-SCREEN MENU CONTROLS
Access to Net1Card’s internal “COMMERCIAL SETTINGS,” “RECEIVER CONTROL,” “TRANS-
MITTER CONTROL,”and “FACTORY TEST MENU” can only be gained with the optional T374AH remote.
Net1Card has two different operation modes: Consumer and Commercial. In the Consumer mode, the TV's “SETUP MENU” can be accessed by pressing the Menu button on either a standard remote control or on the TV'’s front keypad (if the keypad is enabled). In the Commercial mode, the “SETUP MENU” can only be accessed using a Setup remote control (T374AH).
PICTURE ADJUSTMENTS
In the Consumer mode, you can make adjust- ments to the TV picture using the TV's “SETUP
MENU.” Follow the steps below for the proper procedure.
BEGIN
Press the SELECT (M) button on the remote
control to see the
Press the MENU ▼▲ on the remote control
repeatedly to move the highlight to the desired fea- ture to change or adjust.
Press the MENU ◀ ♣ buttons on the remote control to adjust or change the highlighted feature.
Press the RECALL button on the remote con- trol to clear the screen when finished.
32
ON-SCREEN MENU CONTROLS
TYPICAL TV FEATURES
Depending on the model of your television and its features, some or all of the display functions and
features described below will be valid. Remember, the TV must be in the Consumer mode to bring up the “SETUP MENU.” This can be selected by pressing the A button on the optional T374AH remote, then selecting Consumer mode from the Net1Card “COMMERCIAL SETTINGS”menu. Commercial mode is the default selec- tion. (See page 18 for details.)
SETUP MENU
B R I G H T N E S S |
|
|
P I C T U R E |
|
|
C O L O R |
|
|
T I N T |
| DESCRIPTION OF FEATURES |
S H A R P N E S S |
| |
C A B L E |
| Color Adjustments - Press the (+) or |
P R O G R A M |
| |
| ||
CH ADD/DEL |
| |
LABELS |
| the desired level. |
REMINDER |
| Press the (+) or |
ON CHANNEL |
| |
| picture to the desired level. | |
POWER ON |
| |
DISPLAYS |
| Press the (+) or |
KEYBOARD |
| color to the desired level. Press the (+) |
SMART SND |
| |
| or | |
INPUT |
| |
| level. | |
ESP MODE |
| |
CHAN GUIDE |
| Press the (+) or |
LANGUAGE |
| sharpness to the desired level. |
A/V MUTE |
| |
| Volume controls - Press the (+) or | |
CHAN BLANK |
| |
VOL FORCE |
| button to set the maximum allowable |
MIN VOLUME |
| volume available from the keyboard or |
MAX VOLUME |
| |
| the Guest transmitter. | |
ON VOLUME |
| |
SPEAKER |
| Press the (+) button to disable the nor- |
BASS BOOST |
| mal functioning of the volume control. |
VOLUME BAR |
| |
| This forces the volume to the maxi- | |
EXIT |
| |
| mum level allowed by the volume lim- | |
|
|
iter described in the next step. In this mode the mute func- tion is disabled. Press the
Press the VOLUME UP or VOLUME DOWN button to set maximum level available. The range is made up of 63 steps from minimum to maximum.
33