Philips Network Adaper owner manual Introduction, Remote Operation, Features

Page 3

Net 1Card IB 2/15/00 12:17 PM Page 4

INTRODUCTION

The Net1Card is a network television systems control SmartCard that is designed to work with Philips SmartCard televisions in a balanced RF distribution sys- tem. The Net1Card allows an individual with a unit set in the Transmitting mode to control all televisions, up to 8 zones of televisions, or a single television, all set in the Receive mode. The controls include turning the sets on, setting the volume, and tuning to a specific channel for live or prerecorded messages or programs. Any Net1Card

REMOTE OPERATION

Listed below is a brief description of the TH374AH remote control. You need one remote control

(sold separately) to setup and operate the Net 1Card.

Only buttons important to Net1Card are described.

SLEEP - In the Consumer mode, press

RECALL - Press this button to

this button to select the amount of time

bring up the closed caption

you want before the TV turns off.

mode or to exit Net1Card

 

menus.

can be set up to transmit or receive.

The Net1Card allows the individual with the Transmitter unit the option to lock out the Receiver units so that the power, volume, or channels cannot be changed until they are restored by the Transmitter unit. All of this is done in a matter of seconds by using an optional T374AH IR remote control device. (See page 5.) Other features

SELECT (M) - In the Consumer mode, press this button to bring up the on-screen menu options. Also may be used to advance the cursor.

SLEEP

-

SELECT

M

RECALL

+

CURSOR KEYS - Press these buttons (▲ ▼ ♣ ◀ ) to scroll or move through the on- screen menu or to adjust the picture in certain features.

A/CH - Press this

include the ability to change channels for different mes- sages, turn off all receiver televisions from a single loca- tion, send different messages or programs to different groups or individual sets. The Net1Card is easy to install, set up, and operate. The Net1Card also has the ability to poll an individual television to ensure correct systems operation.

The Net1Card also has composite video input, an S- Video input, two audio inputs, an RF input, a speaker jack and a cloning port for easy connectivity to a variety of media devices.

FEATURES

• Audio/Video Jacks for direct connections with VCRs

 

(or other video accessories) for quality TV picture

 

and sound playback.

•

Audio/Video Inputs.

•

Audio/S-Video Inputs.

• Ability to broadcast to an individual TV, to a group

 

of TVs, or to all the TVs in the series.

MUTE - Press this button to turn the sound OFF on the TV. Press again to return the sound to its previous level.

VOL(ume) - Press this button to adjust the sound level of the TV.

A - Press the A but- ton to set a TV in the Net1Card Transmit, Receive, or Factory mode.

ENTER/RESET -

In the Consumer mode, press this button to reset TV settings to factory.

CC- Press this button to bring the Closed Captioning option to the screen.

 

 

A/CH

 

VOL

MUTE

 

CH

 

 

 

A

B

C

D

 

E

F

G

ENTER

1

2

3

P.PREF

 

4

5

6

CC

7

8

9

 

CH GDE

 

0

 

POWER

TV

TV

DCM

 

GUEST

SETUP

SETUP

button to toggle between the present and last viewed channels.

CH(annel) - Press this button to scroll through all available channels.

D & F - Press the the D button to select features under each specific Net1Card mode. Press the F button to display the version of Net 1Card installed.

NUMBERED BUTTONS - Press these buttons to directly access any available channel. (If a single digit channel is chosen, press 0 first. Example for chan-

•

Ability to poll individual TVs.

•

Clone port for limited applications.

4

POWER -

TV/GUEST - Press this button before

Press this

trying to setup the TV after installing

button to

the Net1Card. If the menus do not

turn the TV

come up when you press the A or D

ON or OFF.

button, press this button and try again.

 

5

nel 6; first press 0, then 6.) In certain Net1Card menus, use these buttons to make selections.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents OWNER’S Manual Table of Contents Know These Safety SymbolsFeatures IntroductionRemote Operation Smart Help NET1CARD AssemblyIB7166E002 for complete details Optional Hookups Antenna HookupsIf you have a Cable TV Converter Box If your Cable TV signal is a single roundCable TV Hookup Optional VCR HookupConnect the Video and Audio INput AUDIO/VIDEO InputsVideo Inputs When finished, press the button to highlight Commercial SettingsCommercial Setting When finished, press the button to highlight Rcvr SET IDReceiver Control Transmitter Control When finished, press the button to highlight Rcvr PowerRcvr Channel +/- or Digits to Address Type When finished, press the button to highlight Rcvr LockoutNEL. Discussed below are the options Press the Channel UP or Down Factory Test Menu Television OperationPicture Adjustments ON-SCREEN Menu Controls Typical TV FeaturesON-SCREEN Menu Controls Dard Power On should be set to StandardAfter making your Closed Caption mode selection Closed CaptioningGeneral Information Index Things to try if something isn’t working Glossary TroubleshootingWhat the Purchaser Must Do Limited WarrantyFor One Year Who is Protected?...Where?

Network Adaper specifications

The Philips Network Adapter is a state-of-the-art device designed to enhance the way users connect and interact with their digital environments. With the increasing demand for seamless connectivity in the home and office, Philips has developed this versatile adapter to ensure reliable performance and superior user experience.

One of the key features of the Philips Network Adapter is its ability to support a wide range of devices. Whether you are looking to connect smart TVs, streaming devices, gaming consoles, or other Internet-enabled gadgets, this adapter provides the necessary interface for swift and easy connectivity. It eliminates the limitations often faced with traditional wired connections, offering flexibility and convenience.

The Philips Network Adapter employs advanced wireless technologies, including dual-band Wi-Fi support. This allows for simultaneous connections on both the 2.4 GHz and 5 GHz bands, ensuring that users can enjoy smoother streaming, faster downloads, and reduced latency in online gaming. The result is a seamless and uninterrupted experience, ideal for households with multiple devices in use.

Another notable aspect of the Philips Network Adapter is its compatibility with various networking protocols, including IPv4 and IPv6. This future-proofing feature ensures that the adapter can easily integrate into modern network infrastructures, allowing users to take advantage of the latest advances in internet technology without needing frequent upgrades.

Security is a paramount consideration for any network device, and the Philips Network Adapter prioritizes this with robust encryption protocols such as WPA2. This ensures that users can connect confidently, knowing their data and privacy are protected from unauthorized access.

The compact and sleek design of the Philips Network Adapter also cannot go unnoticed. It fits easily into home or office environments without occupying excessive space or becoming an eyesore. Whether placed on a shelf or mounted on a wall, it complements any decor.

In conclusion, the Philips Network Adapter stands out as a powerful solution for anyone looking to enhance their connectivity. With its impressive features, advanced technologies, and commitment to security and design, it offers a comprehensive solution for today’s digital demands. Whether for leisure or work, this network adapter is a reliable tool that ensures users stay connected efficiently and effectively.
Top Page Image Contents