Philips Network Adaper owner manual Power On should be set to Standard, Dard

Page 18

Net 1Card IB 2/15/00 12:18 PM Page 34

Press the (+) or (-) to choose between MAX(imum) volume or the TURN ON volume. Press the VOLUME UP or VOL- UME DOWN button to set either the MAX(imum) volume level available, or the set TURN ON volume level. The range is made up of 63 steps from minimum to maximum.

Cable TV Mode - Press the (+) button to have the TV receive cable channels 1 to 125. Press the (-) button to have the TV receive the normal off-the-air channels 2-69.

Auto Program - This function allows the TV to scan all the channels and automatically program in memory all active channels on the system. Press the (+) button to activate auto programming. Press the (-) button at any time to stop this function.

Add/Delete Channels - This function allows individual channels to be added or deleted from memory. Tune the desired channel by using the CHANNEL UP/CHANNEL DOWN buttons or by random access, and then press the (+) or (-) button to either add or remove a channel from memory.

Labels - This function will give a name, up to eight charac- ters, to a channel. Press the (-) button to delete any existing label. Press the (+) button to activate this function. Once in modification display, a cursor will point to the position on the label. The Menu ▲▼ buttons (on the T374AH remote) will scan through the available character set. The (+) and (-) buttons will move the cursor to the next position on the label. A total of 32 channels may be labeled.

Reminder - Press the (+) button to allow the continuous dis- play of the current channel number. Press the (-) button and the channel number will appear for only a few seconds after the channel change and then disappear.

On Channel - This function will determine what channel the TV will tune to at initial turn ON. Tune any channel and press the (+) button. The TV will tune to that channel every time it is turned ON. Press the (-) button and the TV will, at turn on, tune to the last channel tuned before turn OFF.

Power On - Press the (+) button for the “POWER FORCED ON” mode. This disables the normal ON/OFF control and the receiver will be activated once AC power is applied. The “Sleep Timer” function is disabled and the set may not be turned OFF except by removing power. Press the (-) button for normal “POWER ON/OFF” control. For Net1Card,

Power On should be set to “STANDARD.”

Displays - The “NO DISPLAYS” function disables any on- screen displays, except the Sleep Timer and the Mute. Press the (+) button to activate this function and the (-) button for standard displays.

34

Keyboard - The “OFF” selection lockouts or disables all functions from the TV’s front control panel. (This function can also be controlled from the Net1Card menu. If “FRONT KEYBOARD OFF” is selected using the Net1Card's “COMMERCIAL SETTINGS” menu, you can- not turn the keyboard “ON” with this menu selection. This item should be set to “ON” for Net1Card.)

Smart Sound - The “ON” selection controls the TV volume to smooth out sound levels during program changes and commercial breaks.

ESP Mode - The “ESP MODE” function will automatically turn OFF the set if it has been ON continuously for the time duration shown. Press the (+) button to activate the function and set the time limit by random access of the desired dura- tion (up to 99 hours). Press the (-) button for normal TV operation.

Channel Guide - Press the (+) button to enable the Channel Guide feature. Press the (-) button to disable the function.

A/V Mute - The “ON” setting goes to a blank Video Blue background, and the TV audio is muted. “OFF” returns the TV to Antenna signal source screen.

Channel Blank - The “Blanked” setting allows the viewer to block the picture to any channel. Press the (+) button to “BLANKED”, or the (-) button to “UNBLANKED”.

Speaker - The “ON” setting is selected by pressing the (+) button when SPEAKER is highlighted in the menu. This will allow the TV speakers to operate. In the “OFF” position (selected by pressing the (-) button) the TV speakers will not work and the external speaker connection on the back of the TV will be operational.

Bass Boost - With the BASS BOOST feature in the “ON” position the low frequency audio range of the TV is increased creating a deeper, fuller sound.

On Volume - Sets the volume for the TV when it is first turned on. For Net1Card, it should be set to “STAN-

DARD.”

Vol Force - Forces the volume to preset levels, even when a lower volume level is selected. For Net1Card, it should be set to “STANDARD.”

Exit - The “OFF” selection will drop the TV’s on-screen fea- ture list from the screen.

35

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OWNER’S Manual Know These Safety Symbols Table of ContentsFeatures IntroductionRemote Operation NET1CARD Assembly Smart HelpIB7166E002 for complete details Antenna Hookups Optional HookupsOptional VCR Hookup If your Cable TV signal is a single roundCable TV Hookup If you have a Cable TV Converter BoxAUDIO/VIDEO Inputs Connect the Video and Audio INputVideo Inputs Commercial Settings When finished, press the button to highlightCommercial Setting When finished, press the button to highlight Rcvr SET IDReceiver Control When finished, press the button to highlight Rcvr Power Transmitter ControlRcvr Channel When finished, press the button to highlight Rcvr Lockout +/- or Digits to Address TypeNEL. Discussed below are the options Factory Test Menu Television Operation Press the Channel UP or DownPicture Adjustments ON-SCREEN Menu Controls Typical TV FeaturesON-SCREEN Menu Controls Power On should be set to Standard DardAfter making your Closed Caption mode selection Closed CaptioningGeneral Information Index Glossary Troubleshooting Things to try if something isn’t workingWho is Protected?...Where? Limited WarrantyFor One Year What the Purchaser Must Do

Network Adaper specifications

The Philips Network Adapter is a state-of-the-art device designed to enhance the way users connect and interact with their digital environments. With the increasing demand for seamless connectivity in the home and office, Philips has developed this versatile adapter to ensure reliable performance and superior user experience.

One of the key features of the Philips Network Adapter is its ability to support a wide range of devices. Whether you are looking to connect smart TVs, streaming devices, gaming consoles, or other Internet-enabled gadgets, this adapter provides the necessary interface for swift and easy connectivity. It eliminates the limitations often faced with traditional wired connections, offering flexibility and convenience.

The Philips Network Adapter employs advanced wireless technologies, including dual-band Wi-Fi support. This allows for simultaneous connections on both the 2.4 GHz and 5 GHz bands, ensuring that users can enjoy smoother streaming, faster downloads, and reduced latency in online gaming. The result is a seamless and uninterrupted experience, ideal for households with multiple devices in use.

Another notable aspect of the Philips Network Adapter is its compatibility with various networking protocols, including IPv4 and IPv6. This future-proofing feature ensures that the adapter can easily integrate into modern network infrastructures, allowing users to take advantage of the latest advances in internet technology without needing frequent upgrades.

Security is a paramount consideration for any network device, and the Philips Network Adapter prioritizes this with robust encryption protocols such as WPA2. This ensures that users can connect confidently, knowing their data and privacy are protected from unauthorized access.

The compact and sleek design of the Philips Network Adapter also cannot go unnoticed. It fits easily into home or office environments without occupying excessive space or becoming an eyesore. Whether placed on a shelf or mounted on a wall, it complements any decor.

In conclusion, the Philips Network Adapter stands out as a powerful solution for anyone looking to enhance their connectivity. With its impressive features, advanced technologies, and commitment to security and design, it offers a comprehensive solution for today’s digital demands. Whether for leisure or work, this network adapter is a reliable tool that ensures users stay connected efficiently and effectively.
Top Page Image Contents