Net 1Card IB 2/15/00 12:18 PM Page 28
TRANSMITTER CONTROL
If you select “LOCK” under “RCVR LOCKOUT,” you have a couple of options in regards to “RCVR POWER,” “RCVR VOLUME,” and “RCVR CHAN-
NEL.” Discussed below are the options.
OPTION 1: If you selected a setting (other than “CUR- RENT”) for any of the three categories – Power, Volume, Channel – the Receiver TVs will be locked into those settings and can only be changed by the the Transmitter TV. Also, “P,” “V,” or “C” will appear at the top of the menu indicating that Power, Volume, or Channel has been locked. You can lock one, two, or all three. For example, if you set all TVs to “RCVR POWER ON,” “RCVR VOLUME 35,” and “RCVR CHANNEL 40,” then all TVs will power on, set their volumes at 35, and tune to Channel 40. Also, none of the Receiver TVs can be adjusted, except by you, and you can even make changes without releasing the lock.
TRANSMITTER CONTROL
*** (PVC) CTRL LOCK***
BROADCAST | ALL SETS |
RCVR POWER | ON |
RCVR VOLUME | 35 |
RCVR CHANNEL | 40 |
RCVR LOCKOUT | LOCK |
UPDATE RCVR TVS |
|
EXIT MENU |
|
PRESS +TO UPDATE RCVRS
OPTION 2: If you selected “CURRENT” for any or all of the settings, the Receiver TVs can make adjustments to either Power, Volume, or Channel. For example, if you left “RCVR VOLUME” at the default “CURRENT,” then the Receiver TVs could be adjusted at the TV to the best volume for the model of TV and the location.
TRANSMITTER CONTROL
*** | CTRL LOCK*** | |
BROADCAST |
| ALL SETS |
RCVR POWER |
| ON |
RCVR VOLUME | CURRENT | |
RCVR CHANNEL | 40 | |
RCVR LOCKOUT | LOCK | |
UPDATE RCVR TVS |
| |
EXIT MENU |
|
|
PRESS +TO UPDATE RCVRS
28
TRANSMITTER CONTROL
Once you have transmitted your message, you will probably want to return control of the Receiver TVs
back to those TVs. If you selected “UNLOCKED” from the ”RCVR
BEGIN
If not already in the “TRANSMITTER CON- TROL” menu, press the D button on the remote control. Then press the ▼ button until “RCVR LOCKOUT” is highlighted.
Press the – (◀) or + (♣) button until “RESTORE” is selected. (Note: you can also select “UNLOCK” from this menu. Doing so, releases the Transmitter TV’s lock on all Receiver TVs, but does not retore the Receiver TVs to their previous settings.)
Press the ▼ button until “UPDATE RCVR TVS” is highlighted. Then, press the – (◀) or + (♣) button. “CURRENT” will appear beside “RCVR POWER” and “RCVR CHANNEL.” The TV’s power, channel, and cable are now restored to their previous settings. Receiver Volume will have to be adjusted at each TV.
When finished, press the ▼ button to highlight “EXIT.” Then press the “M” button. Or you can exit by simply pressing the RECALL button when you’re done.
|
|
|
|
|
|
|
|
|
|
| TRANSMITTER CONTROL |
|
|
|
| ||||
| *** | CTRL LOCK*** |
|
|
|
| |||
| BROADCAST |
| ALL SETS |
|
|
|
| ||
| RCVR POWER |
| ON |
|
|
|
| ||
| RCVR VOLUME | CURRENT |
|
|
|
| |||
| RCVR CHANNEL | 40 |
|
|
|
| |||
| RCVR LOCKOUT | RESTORE |
|
|
|
|
|
| |
|
|
|
| TRANSMITTER CONTROL |
| ||||
| UPDATE RCVR TVS |
|
|
|
|
| |||
|
|
|
| ADDRESS TYPE | BROADCAST |
| |||
| EXIT MENU |
|
|
|
|
| |||
|
|
|
|
| BROADCAST | ALL SETS |
| ||
| PRESS +TO UPDATE RCVRS |
|
|
| |||||
|
|
|
|
| RCVR POWER | CURRENT |
| ||
|
|
|
| ||||||
|
|
|
|
|
|
| |||
|
|
|
|
| RCVR VOLUME | CURRENT |
| ||
|
|
|
|
| RCVR CHANNEL | CURRENT |
| ||
|
|
|
|
| RCVR LOCKOUT | UNLOCKED |
| ||
|
|
|
|
| UPDATE RCVR TVS |
| |||
|
|
|
|
| EXIT MENU |
|
| ||
|
|
|
|
| PRESS + TO UPDATE RCVRS |
| |||
|
|
|
|
|
|
|
|
|
|
29