Philips PT-F100NTE manual Projecting an image, Selecting the input signal, Positioning the image

Page 24

Projecting an image

Projecting an image

Basic Operation

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Press the INPUT SELECT buttons to select the required input method if needed. See “Switching the input signal” on page 26.

The image will be projected on the screen.

Positioning the image

1.Open the Front panel cover.

2.Adjust the projected image with the Lens shift lever. See “Lens shift and positioning” on page 18.

3. Adjust the angle of the projector.

Screw down the Front leg adjusters and adjust the angle vertically.

See “Front leg adjusters and throwing angle” on page 17.

NOTE:

•SIGNAL SEARCH is ON as default and the signal from the connected devices is detected automatically. See “SIGNAL SEARCH” on page 37.

4.Adjust the focus and the projected image size.

Turn the Focus lever and Zoom lever to adjust the image.

You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See “TEST PATTERN” on page 38.

Focus lever

Zoom lever

NOTE:

•Do not touch the Air Exhaust port as this may cause burns or injury.

•If keystone distortion occurs, see “KEYSTONE” on page 34.

•If you adjust the focus, you may need to adjust the size of the image by moving the Zoom lever again.

ENGLISH - 24

Image 24

Contents LCD Projector Commercial Use PT-F100EOperating Instructions Model No. PT-F100NTEImportant Safety Notice Dear Panasonic CustomerENGLISH Important InformationImportant Safety Notice For business users in the European UnionInformation on Disposal in other Countries outside the European Union Important Safety Information Declaration of ConformityDeclaration of Conformity DoC Konformitätserklärung KEImportant Infomation Contents 1. Set up your projector5. Adjust the image Important InformationSettings MaintenanceContents Settings Basic Operation Getting StartedPrecautions with regard to safety WARNINGSImportant Information Precautions with regard to safety CAUTIONSCautions when transporting Cautions when installingAccessories Cautions on useImportant Information Minimum required setting screen INSTALLATIONRead this first LANGUAGERemote control About Your ProjectorProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view a computer. Selectable for inputand output by menu operation Setting up Calculation methods for screen dimensionsScreen size and throw distance Getting StartedFront leg adjusters and throwing angle Setting upSetting on a desk/floor and projecting from front Setting on a desk/floor and projecting from rearAdjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connecting with computers ConnectionsBefore connection to the projector LAN terminalConnecting with AV equipment Connecting with VIDEO IN/S-VIDEO INConnecting with COMPONENT IN ConnectionsSwitching the projector on/off POWER indicatorConnecting DisconnectingSwitching on the projector Switching off the projectorSwitching the projector on/off Selecting the input signal Projecting an imagePositioning the image Remote control operation Setting up the image position automaticallyOperating range OperationSwitching the input signal Using the laser pointerRemote control operation Pressing the COMPUTER buttonResetting to the factory default settings Remote control operationSwitching the position Capturing an imageControlling the volume of the speaker Enlarging the centred areaEnlarging the image Shifting the centre pointAdjusting with the bar scale items Operating procedureSettings Menu NavigationMain menu and Sub-menu Menu NavigationSettings PICTURE menu PICTURE MODECONTRAST BRIGHTNESSDETAILED SETUP For S-VIDEO/VIDEO signalsFor RGB signals PICTURE menuCLOCK PHASE POSITION menuDOT CLOCK KEYSTONERESIZING FRAME LOCKPOSITION menu FILTER SETUP OPTION menuINPUT GUIDE COMPUTER2 SELECTPOWER OFF TIMER AUTO SETUPDIRECT POWER ON SIGNAL SEARCHVOLUME HIGHLANDTEST PATTERN BLACKBOARDINPUT PASSWORD PASSWORD CHANGEAfter you change the password SECURITY menuNETWORK menu Items in NETWORK menuTEMP, LAMP and FILTER Indicators Managing the indicated problemsLAMP indicator TEMP indicatorCare and Replacement Cleaning the projectorBefore cleaning the projector Cleaning the outer surface of the projectorCare and Replacement Resetting the FILTERWhen to replace the Lamp unit Replacing the Lamp unitCeiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unitTroubleshooting Should any problem persist, contact your dealerList of compatible signals Technical InformationAppendix Pin assignments and signal names Communication settingsSerial terminal Technical InformationTechnical Information Cable specifications Control commandsComputer connection guidance ProjectorLAMP switching Switching inputsignals Input signalSpecifications Appendix Screen size and throw distance for 169 aspect ratio Dimensions Trademark acknowledgementsIndex FILTER REMAININGINITIALISE ALL SelectingIndex Web Site http//panasonic.net Printed in JapanS0207-2067C