Philips PT-F100NTE manual OPTION menu, Input Guide, COMPUTER2 SELECT, Filter Setup, Startup Logo

Page 36
OPTION menu

OPTION menu

Remote control

Control panel

See “Navigating through the MENU” on page 29. See “Main menu and Sub-menu” on page 30.

INPUT GUIDE

When you change the input method, the guidance appears in the upper right corner of the screen. The following display methods are available. Press I H to cycle through the options.

Options

Function

 

 

OFF

Turn off the guidance.

 

Display the input method by text.

SIMPLE

The INPUT GUIDE will go out after

 

5 seconds without any operation.

 

Display the input method by graphic.

 

The INPUT GUIDE will go out after

 

10 seconds without any operation.

DETAILED

If you select any COMPUTER

terminal which has no signal, the

 

 

computer connection guidance will

 

be displayed. See “Computer

 

connection guidance” on page 48.

 

 

1.Select USER and press ENTER.

2.Select the required line to enter or edit the original text, and press ENTER.

3.Use F G I H to specify the location of the required character and press ENTER.

The selected character will be displayed in the box. Select DELETE to delete the last entered character and press ENTER.

4.Repeat the step 3 until you finish the text to display in a line.

5.Select OK and press ENTER to set the entered text in a box.

Press G and edit the TEXT2 if you need to, and repeat the step 3 - 5.

COMPUTER2 SELECT

You can switch the function of the COMPUTER2 IN/ 1 OUT terminal.

INPUT

COMPUTER2 IN

OUTPUT

COMPUTER1 OUT

FILTER SETUP

You can change the pace of the ARF (Auto Rolling Filter) performance for the use environment. Press I H to select the required option.

1Ventilated with indoor air (e.g. small office room)

2Ventilated with outdoor air (e.g. large office room, class room)

3Public indoor space (e.g. restaurant, building lobby)

Settings

STARTUP LOGO

You can switch the logo on/off that is displayed when starting up the projector. Press I H to select the required option. STARTUP LOGO will be displayed for 30 seconds.

ON

Active

OFF

Deactive

USER

Display the original text

Editing the original text

If you select USER, you can display the 2 lines of original text up to 40 characters in 1 line instead of the logo.

TEXT CHANGE

 

DELETE

OK

CANCEL

NOTE:

•The ARF is a nonreusable product.

•Select the most suitable option for the use environment.

•If you select an unsuitable option, it may greatly affect on the duration of the projector life.

FILTER REMAINING

You can check the remaining amount of the ARF (Auto Rolling Filter). The colour of the bar scale is indicating the condition of the ARF.

Yellow

The filter remaining amount is getting

 

low.

Red

No more remaining.

NOTE:

•See “Replacing the ARF (Auto Rolling Filter)” on page 42.

•After you replace the ARF, FILTER REMAINING should be reset to “0” by pressing the ENTER button for

3 seconds.

ENGLISH - 36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents LCD Projector Commercial Use PT-F100EOperating Instructions Model No. PT-F100NTEImportant Safety Notice Dear Panasonic CustomerENGLISH Important InformationImportant Safety Notice For business users in the European UnionInformation on Disposal in other Countries outside the European Union Important Safety Information Declaration of ConformityDeclaration of Conformity DoC Konformitätserklärung KEImportant Infomation Contents 1. Set up your projector5. Adjust the image Important InformationSettings MaintenanceContents Settings Basic Operation Getting StartedPrecautions with regard to safety WARNINGSImportant Information Precautions with regard to safety CAUTIONSCautions when transporting Cautions when installingAccessories Cautions on useImportant Information Minimum required setting screen INSTALLATIONRead this first LANGUAGERemote control About Your ProjectorProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view a computer. Selectable for inputand output by menu operation Setting up Calculation methods for screen dimensionsScreen size and throw distance Getting StartedFront leg adjusters and throwing angle Setting upSetting on a desk/floor and projecting from front Setting on a desk/floor and projecting from rearAdjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connecting with computers ConnectionsBefore connection to the projector LAN terminalConnecting with AV equipment Connecting with VIDEO IN/S-VIDEO INConnecting with COMPONENT IN ConnectionsSwitching the projector on/off POWER indicatorConnecting DisconnectingSwitching on the projector Switching off the projectorSwitching the projector on/off Selecting the input signal Projecting an imagePositioning the image Remote control operation Setting up the image position automaticallyOperating range OperationSwitching the input signal Using the laser pointerRemote control operation Pressing the COMPUTER buttonResetting to the factory default settings Remote control operationSwitching the position Capturing an imageControlling the volume of the speaker Enlarging the centred areaEnlarging the image Shifting the centre pointAdjusting with the bar scale items Operating procedureSettings Menu NavigationMain menu and Sub-menu Menu NavigationSettings PICTURE menu PICTURE MODECONTRAST BRIGHTNESSDETAILED SETUP For S-VIDEO/VIDEO signalsFor RGB signals PICTURE menuCLOCK PHASE POSITION menuDOT CLOCK KEYSTONERESIZING FRAME LOCKPOSITION menu FILTER SETUP OPTION menuINPUT GUIDE COMPUTER2 SELECTPOWER OFF TIMER AUTO SETUPDIRECT POWER ON SIGNAL SEARCHVOLUME HIGHLANDTEST PATTERN BLACKBOARDINPUT PASSWORD PASSWORD CHANGEAfter you change the password SECURITY menuNETWORK menu Items in NETWORK menuTEMP, LAMP and FILTER Indicators Managing the indicated problemsLAMP indicator TEMP indicatorCare and Replacement Cleaning the projectorBefore cleaning the projector Cleaning the outer surface of the projectorCare and Replacement Resetting the FILTERWhen to replace the Lamp unit Replacing the Lamp unitCeiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unitTroubleshooting Should any problem persist, contact your dealerList of compatible signals Technical InformationAppendix Pin assignments and signal names Communication settingsSerial terminal Technical InformationTechnical Information Cable specifications Control commandsComputer connection guidance ProjectorLAMP switching Switching inputsignals Input signalSpecifications Appendix Screen size and throw distance for 169 aspect ratio Dimensions Trademark acknowledgementsIndex FILTER REMAININGINITIALISE ALL SelectingIndex Web Site http//panasonic.net Printed in JapanS0207-2067C
Top Page Image Contents