Chapter 5: Operation of Web-based Management
State: Show the status on the port.
Protocol Enabled: Controls whether Loop Detection is enabled on this switch port.
When a port number is chosen and Loop detection is enabled, the port detects the loop and the port will be locked. If no Loop occurred, the port remains unlocked.
Unlock port: When ticking the port, the locked port will be opened and become unlocked. If the port is not checked √, it remains locked.
5.2.11 Broadcast Storm Protection
Function name: Broadcast Storm Protection configuration
Function description: When the broadcast packets received by the switch exceed the threshold configured, the port will be blocked for a period of time that can be set. After a configured time, the switch will detect whether the broadcast packets received on the port still exceed the threshold. If the broadcast traffic is still higher than the configured threshold, the port will be closed for a period of time again. If the broadcast traffic is under the threshold, the port will
Page 60 |