Chapter 5: Operation of Web-based Management
5.4.2 Factory Default
Function name: Factory Default
Function description: Factory Default provides the function to retrieve default settings and replace the current configuration. Except for the IP address setting, all settings will be restored to the factory default values when the “Factory Default” function is performed. If you want to restore all configurations including the IP address setting to the factory default, please press the “Reset” button on the front panel.
Note for “Reset” button: You must press the “Reset” button for more than 3 seconds to restore the factory default setting.
Figure 5-29. Factory Default.
5.4.3 Software Upgrade
Function name: Software Upgrade
Function description: You can just click the “Browse” button to retrieve the file you want in your system to upgrade your switch.
Figure 5-30. Software Upgrade.
5.4.4 Configuration File Transfer
Function name: Configuration File Transfer
Function description: You can backup your switch’s configuration file into your computer folder in case an accident happens. Uploading a backup configuration file into a new or a crashed switch also saves time and avoids mistakes.
Figure 5-31. Configuration Upload/Download.
Page 70 |