Chapter 5: Operation of Web-based Management
5. Operation of Web-based Management
This chapter explains how to manage your Gigabit Smart Switch Eco Fanless and how to configure the
The default values of the Gigabit Smart Switch Eco Fanless (LGB2118A and LGB2124A) are listed in the table below:
Table
Parameter | Default Value |
|
|
IP address | 192.168.1.1 |
|
|
Subnet mask | 255.255.255.0 |
|
|
Default Gateway | 192.168.1.254 |
|
|
Password | admin |
|
|
When the configuration of your Gigabit Smart Switch Eco Fanless is finished, you can browse it using the IP address you set up. For instance, type “http://192.168.1.1” in the address row in a browser, then the following screen (see Figure
The Gigabit Smart Switch supports a simplified user management function that allows only one administrator to configure the switch at one time.
To optimize the display effect, we recommend that you use Microsoft® Internet Explorer (IE) and 1024x768 display resolution.
Figure 5-1. Enter password to login screen.
5.1 Web Management Home Overview
After login, System Information is displayed (not shown in this manual). This page lists default values and shows you the basic information of the switch, including Switch Status, TP Port Status, Fiber Port Status, Aggregation, VLAN, Mirror, SNMP, and Maximum Packet Length. With this information, you will know the software version, MAC address, ports available, and so on. This will be helpful if a malfunction occurs. For more details, refer to the Page Layout Information section on the next page.
Page 45 |