Windows 98 or 98 SE, Windows CE, Windows ME

USB DIRECTORS RS-232

3.When the Select Other Location dialog box appears, type “X:\Win95” (where “X” is the drive letter of your CD-ROM drive) and click “OK.”

4.Confirm that Windows has found the correct driver location and click “Finish.”

5.When Windows prompts you for the driver disk, click “OK.”

6.At the next Windows prompt, type “X:\Win95” (where “X” is the drive letter of your CD-ROM drive) and click “OK”.

After installing the drivers, Windows will detect your USB Director RS-232’s new COM ports and will begin to initialize them. Installation is complete when no more dialog boxes appear. Your new communication ports, numbered sequentially following the existing ports in your system, are now ready.

3.2.2WINDOWS 98 OR 98 SE, WINDOWS CE, WINDOWS ME

To install the USB Director RS-232 drivers in one of these Windows versions:

1.Insert the Black Box driver CD in your CD-ROM drive.