Installation | Black Box IC1002A, USB Directors RS-232, IC135A

CHAPTER 3: Installation

5.Select “Specify a location” and click “Next.”

6.Type in “X:\Win2k” (where “X” is the drive letter of your CD-ROM drive)and click “OK.”

7.Confirm that Windows is pointing to X:\Win2k (where “X” is the drive letter of your CD-ROM drive). Then click “Next.”

NOTE

Drivers installed from the CD have received “Designed for Windows 2000” certification. Drivers downloaded from our

Web site or FTP might be pending certification. If so, Windows 2000 will display a warning: “Digital Signature Not Found.” Click “Yes” to continue with driver installation. If you click “No,” you will need to contact Black Box before continuing to install your USB Director RS-232.

Windows will then finish installing the driver files.

8. Click “Finish” to complete the driver installation.

After installing the drivers, Windows detects your USB Director RS-232’s new COM ports and will begin to initialize them. Installation is complete when no more dialog boxes appear. Your new communication ports, numbered sequentially following the existing ports in your system, are now ready.