CHAPTER 3: Installation
Once the driver installation program has begun, follow the on-screen instructions.
3a. If you are installing drivers for the first time: An Information dialog box informs you that the installation was successful. After clicking “OK,” the installation is complete.
3b. If you are replacing version 1.14 or later: Follow the on-screen instructions. Note that before beginning the installation of the drivers, all applications with open ports must be closed and all USB devices unplugged. If you close all the applications and unplug all the USB devices, then you will not need to reboot for the new drivers to take effect immediately. If any applications are left open or USB devices plugged in, you may choose to abort the installation or to continue and be required to reboot before the upgrade can take effect.
3c. If you are replacing version 1.13 or earlier: The USB Director RS-232 Drivers Installation Complete dialog box tells you that the USB Director RS-232 drivers have been updated. Before the updates can take effect, however, you will need to reboot your computer. To reboot immediately, eject the Black Box driver disk, select the option to restart the computer now, and click “Finish.”
