Xerox t 180 manual Sysgen commands, Sysgen Command menu, Command functions

2.Sysgen commands

This chapter explains the commands used for performing sysgens.

Sysgen Command menu

The Sysgen Command menu, illustrated in table 2-1, appears on the printing system display screen when you boot the sysgen processor. It also appears when COMMANDS is entered following the sysgen prompt character.

Note: The command HOSTCOPY option appears in your Sysgen

Command menu.

The interactive dialogue for a particular procedure may vary slightly depending upon the release medium (tape or cartridge), input method (online or offline), and product configuration.

Table 2-1.Sysgen Command menu

**** SYSGEN PROCESSOR, VERSION M0.0 ****

COMMAND

COMMANDS	Display commands
BOOT	Boot the operating system
SYSGEN	Build or update system files
	on disk from tape or host
FORMAT	Clear and format disk pack
HOSTCOPY	Copy user files from host to
	disk
AUTO	Auto sysgen
MINI	Configuration change only
ERASE	Erase all files

Enter Cmd (’C’ for Menu)>

Command functions

The commands in Table 2-2 may appear in the Sysgen Command menu, depending upon the hardware options present on your system. Command abbreviations are underlined.

XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE 2-1