Xerox t 180 Do you want to save the accounting file?, Do you wish to make any changes? Enter ’y’

SYSGEN AND SYSGEN-RELATED PROCEDURES

	Table 4-4.Steps to perform an offline update sysgen using
		the SYSGEN command (continued)
Step	Action	System response
6.	Enter Y and <ENTER> to allow the	Enter system ID of up to 30 characters
	previously entered ID to be changed. Key in	....*....*....*....*....*....*
	the new ID and press <ENTER>.
		System ID IS: xxxxx
		Do you want to enter a new system id?
	NOTE: When you enter no, sysgen will	’y’ or ’n’
	continue. If you enter yes, you will be able to
	change the system ID again.
7.		Do you want to save the accounting file?
	Enter Y or N and press <ENTER>.	enter ’y’ or ’n’
8.		The base configuration and the system configuration
		options are displayed followed by:
		Do you wish to make any changes? Enter ’y’
	Enter Y or N and <ENTER>. A Y and	or ’n’
		>
	<ENTER> response causes the change
	menu to display. Each time a change is
	made, the change question is asked until an
	N and <ENTER> is entered, and the sysgen
	program continues.
9.		Do you want to discard the changes you just
	To discard the changes you just made and	made? Enter ’y’ or ’n’>
	continue sysgen, enter Y.
	To save the changes you just made and
	continue sysgen, enter N.	Is continuation of sysgen required: (y or n)
	Enter Y and <ENTER>.	Should sysgen read from host or tape?
		’h’ or ’t’
10.	Enter ’t’ and press <ENTER>.	Reading files from tape/host is displayed.
		Each file is read from the online channel or tape and placed
		on the disk.
		Creating file xxxxxx.yyy on drive n
		xxxxxx is the system file name,
		yyy is the system file type, and
		n is the drive ID number that the file is
		stored onto.
		When sysgen completes, the following message displays:
		* Tape rewinding *Sysgen process successful*
		* Sysgen program off *
		Enter Cmd [’C’ for Menu]>

4-18 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE