Xerox t 180 manual Sample configurations, Option Description

Page 24

SAMPLE SYSTEM CONFIGURATIONS

 

 

Table 3-4.Sample configurations

 

 

Option

Description

 

 

 

0)

None

Returns you to the base system configuration display screen.

 

 

 

1)

Full memory test

Determines the amount of system memory test at power on.

 

 

 

2)

Auto boot

Determines whether auto boot is enabled at power on.

 

 

 

3)

Message display

Determines whether boot diagnostic messages display at power on.

 

 

 

4)

Shared disk

Adds or removes the shared disk option.

 

 

 

5)

MICR mode default

This option is not supported on the DocuPrint 180 LPS. Selection of option

 

 

5 has no effect on the LPS.

 

 

Adds or removes the MICR mode default option.

 

 

 

6)

On-line interface (if

Displays the following question:

installed)

DOES THIS SYSTEM HAVE AN ONLINE INTERFACE?

 

 

 

 

ENTER ’Y’ OR ’N’.

 

 

If you enter N, the online feature is removed from the system being

 

 

generated.

 

 

If you enter Y, the configuration options are automatically selected by the

 

 

system and the display returns to the base configuration.

 

 

 

7)

Xerox

Adds or removes the Xerox DocuPrintServer (formerly XPSM)).

DocuPrintServer

 

(formerly XPSM)

 

 

 

 

8)

Kanji

This option is not supported on the DocuPrint 180 LPS. Adds or removes

 

 

Kanji.

 

 

 

9)

Ethernet (if installed)

This option is not supported on the DocuPrint 180 LPS. Selection of option

 

 

9 has no effect on the LPS

 

 

Displays the following question:

 

 

IS THIS SYSTEM CONNECTED TO A XEROX ETHERNET? ENTER ’Y’

 

 

OR ’N’.

 

 

If you enter N, the Ethernet feature is removed from the system being

 

 

generated.

 

 

If you enter Y, the following suboptions display:

 

 

ETHERNET CHANGE LIST:

 

 

1) NONE

 

 

2) READ PRINTER’S ADDRESS

 

 

3) ETHERNET NETWORK ADDRESS

 

 

Selecting NONE results in no Ethernet changes.

 

 

Selecting READ PRINTER’S ADDRESS results in the printing system

 

 

providing its internal address as a parameter to the sysgen processor.

 

 

This address is shown in table 3-2, Base system configuration for

 

 

DocuPrint 180 LPS, in both hexadecimal and decimal format. The decimal

 

 

value is preceded by an asterisk (*). (The printing system internal address

 

 

is set by Xerox at the time of manufacture.)

 

 

Selecting ETHERNET NETWORK ADDRESS results in a prompt for the

 

 

address of the Ethernet network. For a decimal value, enter six zeros. A

 

 

value not preceded by an asterisk is assumed to be hexadecimal. (The

 

 

network address is assigned by Xerox. Consult your network system

 

 

administrator for the correct assignment.)

 

 

 

3-4

XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE

Page 23 Page 25
Image 24
Page 23 Page 25
Contents April 1998 721P85510 Page Related publications Related Publications NumberXerox Docuprint 180 LPS System Generation Guide Table of Contents Index Chapter Content IntroductionAbout the reference set Xerox DocuPrint 180 Laser Printing System Document Set Xerox DocuPrint 180 LPS Forms Creation Guide Font Library Font User GuideDocument conventions BoldIntroduction Xerox Docuprint 180 LPS System Generation Guide Xii Sysgen overview Types of sysgen Sysgen type PurposeOSS software OSS software item Function Resource and information checklist Information you need for full or update sysgenPage Sysgen commands Sysgen Command menuCommand functions Sysgen Command menuSysgen commands Command FunctionEntering and abbreviating commands SYS Sysg SysgePage Sample system configurations Sysgen process Stage DescriptionSample Configuration System ConfigurationMachine Type DP180 LPS CPU Memory = 1024KConfiguration menu Sample configuration options menuSample configurations Option DescriptionEnglish GermanFrench DutchDoes this System have a Raster Image PROCESSOR? Enter ’Y’ or ’N’Type the RIP Unit Numbers Enter Options RIP x is not in the System Please ConfirmCommand Description Additional sysgen parametersSysgen parameters Page Sysgen and sysgen-related procedures PrecautionsPC UI software loading procedure summary Installing and upgrading System UI software Materials required System UI disketteInstalling or upgrading System UI dialog Choosing a format command Performing a full sysgenFull sysgen procedure summary Full sysgen procedureSteps to perform a full sysgen Step Action System responseScsi FORMAT/ERASE Version XX Running Format OptionsSteps to perform a full sysgen Action System response DP0 Confirm Y/NSteps to perform a full sysgen Step Action System response Sysgen program running System ID isDo you want to enter a new system id? Enter system ID of up to 30 charactersCreating file DISPCF.SYS on drive Should sysgen read from host or tape? ’h’ orReading files from tape/host is displayed Creating file xxxxxx.yyy on drive nTerminal Are the Date and Time Correct ASDisplayed Y/N? PATCH-ID InvokesThis chapter This completes a full sysgen Performing an offline update sysgen Choosing a sysgen commandOffline update sysgen procedure summary Steps to perform an offline update sysgen using Auto commandOperating System Do you wish to continue auto sysgenThis will be an auto sysgen Creating file xxxxxx.yyy on drive dXxxxxx is the system file name Yyy is the system file type,This TIME? Y/N IFU Ipfnts IpfntsIF1100 Font family specific font family Sysgen command Do you want to save the accounting file? Do you wish to make any changes? Enter ’y’Should sysgen read from host or tape? ’h’ or ’t’Applying sysgen patches MER001 Patch to allow Mergenthaler fontsOnly Enter patch ID’s or press Enter Would YOU Like to Compile the .IMP Files AT this TIME? Y/NPerforming an online update sysgen Online update sysgen procedure summarySteps to perform an online update sysgen Steps to perform an online update sysgenCopy user files from host to disk ’n’Enter y or ’n Enter y or nMade? Enter y or n Or tWaiting to read files from host End of tape found. Is another tape to beSent? ’y’ or ’n’ Vary offline at host. Then enter ’C’PATCH-ID This chapter This completes online sysgen Mini sysgen procedure summary Performing a mini sysgenSteps to perform a mini sysgen OS1000 Ready For Commands Hhmmss Formatting a system disk Disk formatting summarySteps to format a system disk Erasing a system disk Disk erasing summarySteps to erase a disk End of tape read OS1000 Ready for Commands Hhmmss Steps for loading incremental patchesSteps for loading incremental patches System will Rollover in 1 SECTable A-1.Sample JCL using the Iebgener Sample JCL for transmission of system software tapesPage Glossary Glossary GLOSSARY-3 GLOSSARY-4 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-5 GLOSSARY-6 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-7 GLOSSARY-8 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-9 GLOSSARY-10 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-11 GLOSSARY-12 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-13 GLOSSARY-14 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-15 GLOSSARY-16 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-17 GLOSSARY-18 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-19 GLOSSARY-20 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-21 GLOSSARY-22 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-23 GLOSSARY-24 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-25 Gsm HposIps GLOSSARY-27 Ppm SciSpi SysgenGLOSSARY-29 Page Index Index

t 180 specifications

The Xerox T180 is a robust digital production printer designed for high-volume printing environments, showcasing a blend of advanced technologies and user-focused features. It exemplifies Xerox’s commitment to providing reliable solutions for businesses looking to enhance their printing capabilities.

One of the standout features of the T180 is its impressive print speed, which can reach up to 180 pages per minute. This rapid output is complemented by a first-page-out time that ensures minimal wait for users, making it ideal for busy workgroups and print departments. The T180 is designed to handle large print jobs efficiently, accommodating various paper sizes and weights, thus catering to diverse printing needs.

The T180 employs advanced LED printing technology, which provides high-quality output with sharp text and vibrant images. Its 600 x 600 dpi resolution ensures that printed materials maintain exceptional clarity and detail, making it suitable for both text-heavy documents and high-quality color graphics. The printer also supports a variety of media types, including standard office paper, glossy stock, and envelopes, providing flexibility for different applications.

A significant characteristic of the Xerox T180 is its robust paper handling capabilities. The printer is equipped with multiple input trays that can hold a substantial amount of paper, minimizing the need for frequent reloading. Additionally, the automatic duplexing feature allows for seamless double-sided printing, saving time and resources.

The T180 integrates seamlessly with various workflows, supporting both traditional printing jobs and modern digital demands. With the inclusion of various connectivity options, including USB, Ethernet, and Wi-Fi, users can easily connect the printer to multiple devices and networks. This multi-connectivity capability enhances collaboration in a fast-paced work environment.

For businesses concerned with sustainability, the Xerox T180 offers eco-friendly features, including energy-efficient operation and the ability to recycle consumables. This focus on environmental responsibility is increasingly important in today's business landscape.

User experience is paramount with the T180, and its intuitive interface simplifies operation and maintenance. The printer includes a user-friendly touchscreen that allows for easy navigation of settings and job management, enhancing productivity further.

In summary, the Xerox T180 is engineered for efficiency and high-performance, making it an excellent choice for organizations that demand high-quality output combined with speed and reliability. With its advanced features and innovative technologies, the T180 stands out as a leading solution for modern printing needs.
Top Page Image Contents