Xerox t 180 manual Steps to perform a mini sysgen

SYSGEN AND SYSGEN-RELATED PROCEDURES

	Table 4-6.	Steps to perform a mini sysgen
Step	Action		System response
1.	Press the Boot button.		:The Boot menu window displays:
			Operating System
			System Disk
			Reel to Reel
			QIC
			18/36 Track Tape
2.	Select your choice of sysgen media with		The command menu displays:
	the mouse.
			COMMANDS	Display Commands
			BOOT	Boot the operating system
			SYSGEN	Build or update system files
				on disk from tape or host
			FORMAT	Format and initialize disk
				pack
			HOSTCOPY	Copy user files from host to
				disk
			AUTO	Auto Sysgen
			MINI	Configuration change only
			ERASE	Erase all files.
3.	Key in MINI and press <ENTER>.		The base configuration and the system configuration
			options are displayed followed by:
			Do you wish to make any changes? Enter
			’y’ or ’n’ >
4.	Enter Y or N and <ENTER>. A Y and
	<ENTER> response causes the change
	menu to display. Each time a change is
	made, the change question is asked until
	an N and <ENTER> is entered, and the
	sysgen program continues.		Do you want to discard the changes you
	To discard the changes you just made		just made? Enter ’y’ or ’n’
	and continue sysgen, enter Y.
	To save the changes you just made and
	continue sysgen, enter N.
	Enter N and <ENTER>.
5.			Creating file DISPCF.SYS on drive 0.
			* Sysgen program off *
			Enter Cmd (’C’ for Menu)>

4-28 XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE