SYSGEN AND
Table 4-2. Steps to perform a full sysgen (continued)
Step | Action | System response |
|
|
|
7. | Enter the option number and press |
|
| <ENTER>. |
|
| Option 1 selects all disk drives installed on |
|
| the controller. |
|
| Option 2 allows individual drives to be | Enter the disk units to format |
| selected. |
|
| Enter the drive unit number to be formatted. |
|
| If more than one drive unit is to be formatted, |
|
| enter all selected drive unit numbers |
|
| separated by commas. |
|
| Such as: >0,1,3 |
|
| Then press <ENTER>. | DP0: CONFIRM (Y/N) |
|
| The following information is displayed for the disks selected |
|
| to be formatted: |
|
| Disk characteristics (DPx:) |
|
| Manufacturer & Type: (manufacturer) (disk |
|
| type) |
|
| Unit Serial Number: nnnnn |
|
| Usable capacity: cccc MB |
|
| Number of |
|
| Number of heads: h |
|
| Number of tracks: ttttt |
|
| Spare sectors per cylinder: s |
|
| Spare tracks per device: tt |
|
| >>>Enter "Y" to confirm that you want to |
|
| continue |
|
| > |
| NOTE: Only one disk’s information will be |
|
| displayed at a time. Entering Y will display |
|
| the next installed disk or cause sysgen to |
|
| continue. |
|
|
|
|
8. | Enter Y and press <ENTER> | 1. Format Selected Disk(s) |
|
| 2. Abort Format |
|
| Enter selection: |
|
| > |
|
|
|
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE |