Xerox t 180 manual Additional sysgen parameters, Sysgen parameters, Command Description

Page 27

SAMPLE SYSTEM CONFIGURATIONS

Additional sysgen parameters

 

In addition to the configuration options listed previously, you may

 

also need to supply the following information during the system

 

generation process.

 

Table 3-5.Sysgen parameters

 

 

Command

Description

 

 

Type of sysgen

Sysgen, auto sysgen, or mini sysgen can be performed by selecting

 

appropriate commands from the Sysgen Command menu (Table 2-1)

 

 

System ID

Each system can be assigned a name of up to 30 alphanumeric

 

characters, including spaces.

 

The ID displays in the following situations:

 

• Whenever the system is booted

 

• When a rollover and recovery occurs

 

• In a rollover dump

 

• Whenever a sysgen is performed

 

• On listings produced by the Editor

 

• On listings produced by the REPORT command to report billing

 

information.

 

 

Accounting file

You are asked if you want to save user accounting information.

 

Remember that if a currently existing accounting file is not saved, you

 

lose not only the accounting data but also the hierarchical data used to

 

structure the file.

 

 

Report accounting

You are asked if you want report accounting. This results in run statistics

 

being recorded for each report, as opposed to each job (which may

 

contain several reports).

 

 

Setting default values

After the sysgen completes, you may want to adjust the following

 

parameters to which the sysgen automatically assigns default values:

 

• Maximum fonts per job (default 32)

 

• Maximum forms per job (default 12)

 

• Maximum graphics per job (default 32)

 

• Print file size (default of 425 cylinders is not determined by a

 

sysgen).

 

Refer to the Xerox DocuPrint 180 LPS Operations Reference for

 

information on modifying these values.

 

 

XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE

3-7

Page 26 Page 28
Image 27
Page 26 Page 28
Contents April 1998 721P85510 Page Related Publications Number Related publicationsXerox Docuprint 180 LPS System Generation Guide Table of Contents Index Chapter Content IntroductionAbout the reference set Xerox DocuPrint 180 Laser Printing System Document Set Font Library Font User Guide Xerox DocuPrint 180 LPS Forms Creation GuideBold Document conventionsIntroduction Xerox Docuprint 180 LPS System Generation Guide Xii Types of sysgen Sysgen type Purpose Sysgen overviewOSS software OSS software item Function Information you need for full or update sysgen Resource and information checklistPage Sysgen Command menu Sysgen commandsSysgen Command menu Command functionsCommand Function Sysgen commandsSYS Sysg Sysge Entering and abbreviating commandsPage Sysgen process Stage Description Sample system configurationsCPU Memory = 1024K Sample ConfigurationSystem Configuration Machine Type DP180 LPSSample configuration options menu Configuration menuOption Description Sample configurationsDutch EnglishGerman FrenchRIP x is not in the System Please Confirm Does this System have a Raster Image PROCESSOR? Enter’Y’ or ’N’ Type the RIP Unit Numbers Enter OptionsCommand Description Additional sysgen parametersSysgen parameters Page Sysgen and sysgen-related procedures PrecautionsPC UI software loading procedure summary Materials required System UI diskette Installing and upgrading System UI softwareInstalling or upgrading System UI dialog Performing a full sysgen Choosing a format commandStep Action System response Full sysgen procedure summaryFull sysgen procedure Steps to perform a full sysgenFormat Options Scsi FORMAT/ERASE Version XX RunningDP0 Confirm Y/N Steps to perform a full sysgen Action System responseSteps to perform a full sysgen Step Action System response Enter system ID of up to 30 characters Sysgen program runningSystem ID is Do you want to enter a new system id?Creating file xxxxxx.yyy on drive n Creating file DISPCF.SYS on driveShould sysgen read from host or tape? ’h’ or Reading files from tape/host is displayedPATCH-ID Invokes TerminalAre the Date and Time Correct AS Displayed Y/N?This chapter This completes a full sysgen Performing an offline update sysgen Choosing a sysgen commandOffline update sysgen procedure summary Do you wish to continue auto sysgen Steps to perform an offline update sysgen usingAuto command Operating SystemYyy is the system file type, This will be an auto sysgenCreating file xxxxxx.yyy on drive d Xxxxxx is the system file nameThis TIME? Y/N IFU Ipfnts IpfntsIF1100 Font family specific font family Sysgen command ’h’ or ’t’ Do you want to save the accounting file?Do you wish to make any changes? Enter ’y’ Should sysgen read from host or tape?Applying sysgen patches MER001 Patch to allow Mergenthaler fontsOnly Enter patch ID’s or press Enter AT this TIME? Y/N Would YOU Like to Compile the .IMP FilesOnline update sysgen procedure summary Performing an online update sysgen’n’ Steps to perform an online update sysgenSteps to perform an online update sysgen Copy user files from host to diskOr t Enter y or ’nEnter y or n Made? Enter y or nVary offline at host. Then enter ’C’ Waiting to read files from hostEnd of tape found. Is another tape to be Sent? ’y’ or ’n’PATCH-ID This chapter This completes online sysgen Performing a mini sysgen Mini sysgen procedure summarySteps to perform a mini sysgen OS1000 Ready For Commands Hhmmss Formatting a system disk Disk formatting summarySteps to format a system disk Erasing a system disk Disk erasing summarySteps to erase a disk System will Rollover in 1 SEC End of tape read OS1000 Ready for Commands HhmmssSteps for loading incremental patches Steps for loading incremental patchesSample JCL for transmission of system software tapes Table A-1.Sample JCL using the IebgenerPage Glossary Glossary GLOSSARY-3 GLOSSARY-4 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-5 GLOSSARY-6 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-7 GLOSSARY-8 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-9 GLOSSARY-10 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-11 GLOSSARY-12 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-13 GLOSSARY-14 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-15 GLOSSARY-16 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-17 GLOSSARY-18 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-19 GLOSSARY-20 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-21 GLOSSARY-22 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-23 GLOSSARY-24 Xerox Docuprint 180 LPS System Generation Guide GLOSSARY-25 Gsm HposIps GLOSSARY-27 Sysgen PpmSci SpiGLOSSARY-29 Page Index Index

t 180 specifications

The Xerox T180 is a robust digital production printer designed for high-volume printing environments, showcasing a blend of advanced technologies and user-focused features. It exemplifies Xerox’s commitment to providing reliable solutions for businesses looking to enhance their printing capabilities.

One of the standout features of the T180 is its impressive print speed, which can reach up to 180 pages per minute. This rapid output is complemented by a first-page-out time that ensures minimal wait for users, making it ideal for busy workgroups and print departments. The T180 is designed to handle large print jobs efficiently, accommodating various paper sizes and weights, thus catering to diverse printing needs.

The T180 employs advanced LED printing technology, which provides high-quality output with sharp text and vibrant images. Its 600 x 600 dpi resolution ensures that printed materials maintain exceptional clarity and detail, making it suitable for both text-heavy documents and high-quality color graphics. The printer also supports a variety of media types, including standard office paper, glossy stock, and envelopes, providing flexibility for different applications.

A significant characteristic of the Xerox T180 is its robust paper handling capabilities. The printer is equipped with multiple input trays that can hold a substantial amount of paper, minimizing the need for frequent reloading. Additionally, the automatic duplexing feature allows for seamless double-sided printing, saving time and resources.

The T180 integrates seamlessly with various workflows, supporting both traditional printing jobs and modern digital demands. With the inclusion of various connectivity options, including USB, Ethernet, and Wi-Fi, users can easily connect the printer to multiple devices and networks. This multi-connectivity capability enhances collaboration in a fast-paced work environment.

For businesses concerned with sustainability, the Xerox T180 offers eco-friendly features, including energy-efficient operation and the ability to recycle consumables. This focus on environmental responsibility is increasingly important in today's business landscape.

User experience is paramount with the T180, and its intuitive interface simplifies operation and maintenance. The printer includes a user-friendly touchscreen that allows for easy navigation of settings and job management, enhancing productivity further.

In summary, the Xerox T180 is engineered for efficiency and high-performance, making it an excellent choice for organizations that demand high-quality output combined with speed and reliability. With its advanced features and innovative technologies, the T180 stands out as a leading solution for modern printing needs.
Top Page Image Contents